Rohtak venue
Stall fabrication at Open Exhibition Grounds, Rohtak
Open grounds where hangar-style German-tent exhibitions and trade fairs are set up.
11
Rohtak venues covered
0
Named exhibition venues
11
Venue categories
Tier 2
Haryana market
Exhibiting at Open Exhibition Grounds, Rohtak
Open grounds where hangar-style German-tent exhibitions and trade fairs are set up. We design, fabricate, install and dismantle stalls here, with the organiser drawings and approvals prepared as part of the project rather than quoted as an extra.
A venue imposes a rulebook, and the stall has to be built to it: how high you can go, whether you can hang anything, what you may fix into the floor, how much power you get and which hours you can work. We read that rulebook at design stage, not at build-up.
Placed against the rest of the Rohtak list, Open Exhibition Grounds, Rohtak is the most open end of it — no walls, no ceiling, no fixed limits, and no shelter either. Knowing that before you design is what stops a stand being drawn for a hall and then built in a ballroom, which is the most expensive revision in this business.
As a Tier 2 market in Haryana, Rohtak runs a thinner and more seasonal show calendar across 11 venue categories. That usually means a shorter build window, a venue in use the day before, and a strike timed against the next booking rather than the next show.
Building on an open exhibition ground
On an open ground the building is temporary and so is everything it depends on. Flooring levels the ground, tenting keeps the rain out, a generator provides the power and all three are installed before your stand begins. That is why open-ground build-up windows are longer than indoor ones, and why the sequence matters more than the stand design does.
Within Rohtak the specific room still matters: two open exhibition grounds in the same city can differ on clear height, access and power. We confirm those in writing for your edition rather than carrying an assumption from the last build.
What changes at open exhibition grounds
| Build input | At open exhibition grounds |
|---|---|
| Access route & panel sizes | Vehicles usually reach the stand itself, so panel size is limited by the truck and the crew rather than by a door. That is the one real structural advantage an open ground gives a builder. |
| Fixing method | Pegs, ballast and ground anchors, plus fixings into the hangar or tent frame where the organiser permits them. Tall elements are triangulated because there is nothing solid to lean against. |
| Power source | Generator supply with its own distribution and a backup path. Cable runs are long, so voltage drop, protected routing and crossing points across walkways are designed rather than discovered. |
| Floor protection | Raised platform flooring to level uneven ground, keep dust down and give cables a route. Underneath the platform, drainage matters as much as levelling does. |
| Build & strike hours | A longer build-up window than an indoor hall, because tenting, flooring and power all precede the stand. Daylight working is the norm and dust is continuous. |
| Weather & environment | The governing constraint. Rain, wind, heat and dust are all designed for — sealed edges, covered junctions, wind loading on anything tall, and no graphic that cannot take a shower. |
Every row here is a design input rather than a detail. Two stands of identical area in Rohtak can need completely different engineering because these six answers differ, which is why we settle them before anything is cut.
How we build for this kind of venue
- Weather protection and water ingress planned for, not improvised on the day
- Raised platform flooring to level the ground, seal out dust and carry cable runs
- Generator power with its own distribution and a backup path
- Edge sealing and covered electrical junctions as standard on an exposed site
- A longer build-up window because tenting, flooring and power precede the stand
- Wind loading accounted for on every tall, hanging or fabric element
What to ask the organiser about open exhibition grounds
A quote for open exhibition grounds is an estimate until these answers exist, and a price afterwards. Ask the organiser for them in writing — not because anyone is being difficult, but because the same venue issues different rules for different shows.
Get these in writing before you brief anyone
- Who is responsible for drainage and for standing water during the show
- Wind-loading limits on tall or hanging elements, and whether any are barred outright
- Whether power is generator or mains, the allocation per stand, and the distance to the connection point
- Overnight security arrangements on an open site
- The ground surface — levelled earth, hardstanding or turf — and whether pegging is permitted
- Whether tenting or a hangar is provided by the organiser, and the clear height under it
Who exhibits at Rohtak venues, and what that changes
Exhibitors at Rohtak venues come mainly from automobile, IT services, agri, real estate and engineering — the sectors that fill Haryana's show floors. Those audiences do not want the same stand, and at open exhibition grounds the difference shows up in the build rather than in the brief: who needs a closed room, who needs a load-rated floor, who needs water and drainage, who needs nothing but a screen and two chairs.
Most Rohtak exhibitors are selling to more than one of those audiences, which is an argument for a layout rather than a style. Give the IT services audience the frontage and the agri audience the back corner, and the stand stops trying to be two things in the same square metre.
Rohtak's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| IT services | An IT services audience is buying people, so the stand is mostly meeting space — demo screens on the aisle face and two or three private seating pockets behind them. |
| Agri | Agri shows mean seed, produce and inputs on open display, plus a shaded standing area — most of this audience has already walked an open ground in the sun before reaching you. |
| Real estate | Real estate sells on models and screens. A scale model on a lit plinth, large visuals at eye height, and several seated pockets where a booking conversation can run twenty minutes. |
| Engineering | An engineering audience reads drawings and specifications, so the stand needs a technical wall, a sample or cutaway to handle, and a table with chairs where a quote can actually be discussed. |
| Automobile | An automobile and components audience wants to touch the part. Plan a load-rated display platform, a cutaway or turntable at hip height, and circulation wide enough for a crowd around one vehicle. |
The sectors listed are the ones that drive exhibiting activity across Haryana. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Open Exhibition Grounds, Rohtak
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Open Exhibition Grounds, Rohtak
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
The figures are the same ones our stall planner uses, so a quote can be checked against them line by line: storage at 10% of the area up to 18 sq.m and 15% above it, a meeting corner at 5% unless you are actually hosting meetings, display taking whatever remains, one staff member per 9 sq.m, and the number of visitors who can stand in the stall at once coming out at display area divided by 2.5.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Open Exhibition Grounds, Rohtak
On an open ground your competition is the sky, not the neighbouring stand. Height, a roof line of your own and lighting that still works at dusk are what make a stand findable from the far side of the ground.
Height and light are what buy visibility in a shared hall. Where the venue allows it, go up — a tall brand element or a hanging banner is read from across the floor in a way that floor-level graphics never are.
Because Rohtak's show calendar leans towards automobile, IT services and agri, the stands we build at this venue usually need to balance open display against a private corner for commercial conversations.
How a build at open exhibition grounds runs
01
Read the venue pack
Before anything is drawn we ask for the organiser's pack for your edition: the stand plan with open sides marked, the build-up and dismantle windows, and the rules on height, rigging, fixing and power. At open exhibition grounds the answer that most often changes a design is whether tenting and flooring are provided by the organiser, and when they will be finished.
02
Design to the limits
The concept is then developed inside those limits rather than adjusted to them afterwards. At open exhibition grounds that means designing for platform flooring, sealed edges, wind loading on tall elements and generator distribution from the first sketch instead of retrofitting it to a finished drawing.
03
Build and test in the workshop
The stall is fabricated and then stood up in our own workshop: panels numbered, graphics trial-fitted, circuits tested and lamps aimed. Problems get found where there is time to fix them rather than at open exhibition grounds at midnight.
04
Install, hand over, strike
A named project manager and the crew that pre-assembled the stall install it to the drawing and hand over a working stand. Site care is part of that rather than an afterthought: levelling, dust sealing at the platform edges and covered electrical junctions. The same crew returns to dismantle and clear the stand inside the organiser's window.
What else is in Rohtak
There is no dedicated expo hall on the Rohtak list, so every show in the city borrows a room built for something else. That is the single most useful thing to know before designing a stand here: whatever the venue is, it was not designed for exhibitions, and the rules will reflect that.
Underneath the named venues sit the 11 venue categories we cover in every city, Rohtak included: resort & lawn venues, 5-star hotel ballrooms, convention & banquet halls, open exhibition grounds, mall atriums, university & college campuses, industry association halls, stadium & sports complexes, corporate campus event spaces, industrial estate expo grounds and government exhibition grounds. A large share of exhibiting activity in India happens in those rooms rather than in exhibition halls, which is why they get their own pages rather than a footnote.
Every Rohtak venue we cover
Build-up
Build-up, access and approvals in Rohtak
In Rohtak the schedule is the organiser's, not yours — which means the build has to be designed around a fixed window, a shared bay and a queue. Pre-assembly in the workshop is what turns that window from a risk into a routine.
Everything the stand needs — structure, print, lighting, flooring, furniture, AV and the crew to install and strike it — can be bundled into a single itemised quote with one project manager behind it.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Rohtak organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Exhibiting elsewhere in Haryana
Beyond Rohtak we build in 7 other Haryana cities: Gurugram, Faridabad, Panchkula, Sonipat, Panipat and Karnal, plus 1 others. Same drawings, same workshop, same project manager — which is what makes a second city cheaper than the first rather than a repeat of it.
Open exhibition grounds are not unique to Rohtak either: we cover the same category in all 8 of the Haryana cities on our list, which means the access, fixing and power pattern described above travels with you. A stand built for open exhibition grounds here is usually re-skinnable for the equivalent venue in the next city rather than rebuildable.
If this venue is one stop on a programme, say so at design stage. A stand drawn to be reused is drawn differently — demountable joints, numbered panels, graphics on replaceable skins and a storage footprint that fits a standard crate — and retrofitting that later costs more than building it in.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Venue FAQ
Can you build at Open Exhibition Grounds, Rohtak?+
Yes. We build at open exhibition grounds throughout Rohtak, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Open Exhibition Grounds, Rohtak cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
Can you provide AV, lighting and furniture at Open Exhibition Grounds, Rohtak?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
How early should I book for a show at Open Exhibition Grounds, Rohtak?+
Four to six weeks ahead for a custom stall and eight or more for a double-decker or pavilion. Urgent builds in seven to ten days are possible with a simplified design.
What are the build-up timings at Open Exhibition Grounds, Rohtak?+
Build-up windows are set by the organiser for each show rather than by the venue alone, so we confirm them in writing for your edition and plan the build — including night shifts if needed — around them.
Do you handle approvals for Open Exhibition Grounds, Rohtak?+
Yes. We prepare dimensioned drawings, electrical load details and structural documents to the organiser's format, and check the design against the venue's height, rigging and fire rules before fabrication.
Is build-up longer on an open ground?+
Yes. Tenting, flooring and power distribution all have to be finished before stand building starts, so the organiser's build-up period is longer than an indoor hall's and the sequence is published. We plan our arrival against that sequence rather than against the first available day.
How is power supplied on an open exhibition ground?+
Usually by generator, with distribution run out to the stands and a backup path for critical loads. We confirm the allocation and the distance to the connection point in advance, because long cable runs change both the cable specification and the cost.
Do you design differently for automobile exhibitors here?+
Yes. Rohtak's show calendar is driven by automobile, IT services, agri, real estate and engineering, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at another Haryana venue?+
Usually, if it is built for it. We cover 8 Haryana cities including Rohtak, Gurugram, Faridabad and Panchkula, and a frame-and-skin stand can be stored, re-skinned with new graphics and rebuilt at the equivalent venue elsewhere in the state. Say so at design stage, because a reusable stand is detailed differently.
What is the biggest risk at open exhibition grounds?+
Discovering a constraint after fabrication. Flooring, tenting and generator power all precede your stand on an open ground, so a crew planned in for the first available day arrives before the site is ready for them. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Rohtak
Other Haryana cities we cover
Exhibiting soon? Let's build your stall.