Mohali venue
Stall fabrication at Convention & Banquet Halls, Mohali
Large pillar-less banquet and convention halls used for consumer expos, wedding fairs and B2B meets.
11
Mohali venues covered
0
Named exhibition venues
11
Venue categories
Tier 2
Punjab market
Exhibiting at Convention & Banquet Halls, Mohali
Large pillar-less banquet and convention halls used for consumer expos, wedding fairs and B2B meets. Our crews work to the organiser's build-up window at this venue, pre-assembling in the workshop so site time goes on assembly rather than fabrication.
A venue imposes a rulebook, and the stall has to be built to it: how high you can go, whether you can hang anything, what you may fix into the floor, how much power you get and which hours you can work. We read that rulebook at design stage, not at build-up.
Placed against the rest of the Mohali list, Convention & Banquet Halls, Mohali is the practical middle of it — clear span and usable height, bought at the price of a single shared door. Knowing that before you design is what stops a stand being drawn for a hall and then built in a ballroom, which is the most expensive revision in this business.
As a Tier 2 market in Punjab, Mohali runs a thinner and more seasonal show calendar across 11 venue categories. That usually means a shorter build window, a venue in use the day before, and a strike timed against the next booking rather than the next show.
Building in a convention or banquet hall
What a banquet or convention hall offers is clear span — no columns in the middle of your stand and a ceiling high enough to build upwards into. What it rarely offers is a dock. Material comes in through a door and along a corridor on trolleys, in a slot you share, which is why the stand is designed as carried sections with concealed joints.
Convention & banquet halls vary from one address to the next even inside Mohali, so the figures below are the pattern rather than the contract. The organiser's pack for your show is what we actually design to.
What changes at convention & banquet halls
| Build input | At convention & banquet halls |
|---|---|
| Access route & panel sizes | Often a single pair of doors and a shared corridor rather than a loading bay. The narrowest door on the route sets the widest panel, so large surfaces are split into carried sections joined on site. |
| Fixing method | Freestanding construction on a finished floor. Walls and columns stay untouched, and where height is needed it is braced back into the stand itself rather than into the hall. |
| Power source | House distribution boards, with a load figure confirmed in advance. When several stands share one board, the stand that declared its load honestly is the one that stays lit. |
| Floor protection | Protection wherever trolleys run and under anything heavy or wheeled. Raised platform flooring also gives cables a route when the floor cannot be chased or taped. |
| Build & strike hours | A booked, sequenced slot, because every exhibitor comes through the same door. Dismantle is timed against the hall's next booking, which is often tighter than the show's own schedule. |
| Weather & environment | Indoors, so the variables are air-conditioning and the door line. A stand beside an entrance takes heat, dust and a draught every time the doors open. |
These six are the ones that change the stand rather than the drawing. Confirm them for your edition with the organiser and we will design to the answers; where an answer is unavailable we design to the conservative assumption and revise once it arrives.
How we build for this kind of venue
- Raised platform flooring where cable runs cannot be chased into the floor
- Dismantle scheduled against the hall's next booking rather than against the show
- Floor protection wherever trolleys run and under any wheeled or heavy element
- Power drawn from house distribution with the stand's load confirmed in advance
- Panel sizes set by the widest door on the route, not by the width of the hall
- Freestanding construction braced back into the stand rather than into the hall
What to ask the organiser about convention & banquet halls
Send the organiser this list before you commission anything. Each answer removes a contingency from the quote, and at convention & banquet halls two or three of them change the structure rather than the finish.
Get these in writing before you brief anyone
- Floor-protection requirements and whether trolleys are permitted on the finished floor
- Whether the hall has another booking immediately after the show, and the hard clearance time
- Clear ceiling height and whether suspension from the hall structure is offered
- Fire-retardancy documentation the venue or organiser will ask to see
- The dimensions of the widest door on the route in, and whether a dock or ramp exists at all
- Whether the organiser supplies aisle carpet, and where your stand's edge is deemed to begin
Who exhibits at Mohali venues, and what that changes
The sector mix in Mohali is hosiery, agri machinery, bicycles, food processing and sports goods, and each of those brings its own non-negotiables onto a stand. The table below is what we design against at convention & banquet halls before a single visual is drawn, because most of these requirements are structural or electrical rather than decorative.
Where a Mohali show draws from several of those sectors at once, the stand has to serve two briefs in one footprint. Zoning does it — sports goods on the open frontage where it needs to be seen, hosiery in the pocket behind where it needs to be discussed — and the space plan below is where that gets decided.
Mohali's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| Sports goods | Sports goods need a trial area and height for racked product. Protect the floor under any activity, and keep the demo zone from spilling into the aisle. |
| Hosiery | Hosiery and apparel buyers want range and hand-feel. Rail capacity, a handling table, a mirror and a lockable stock area are worth more than a feature wall. |
| Agri machinery | Agri machinery needs a load-rated platform, a route onto it that takes wheels or tracks, a marked safe viewing line, and a power feed sized for the heaviest motor on the stand. |
| Bicycles | Bicycles need floor area and height — wall mounts, a hanging rack and a clear test strip or roller. None of that works pressed against a back wall. |
| Food processing | Food processing mixes machinery with product, so you need a load-rated platform, a hygienic demo surface, a water point and a safe line between the visitor and a moving part. |
The sectors listed are the ones that drive exhibiting activity across Punjab. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Convention & Banquet Halls, Mohali
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Convention & Banquet Halls, Mohali
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
The figures are the same ones our stall planner uses, so a quote can be checked against them line by line: storage at 10% of the area up to 18 sq.m and 15% above it, a meeting corner at 5% unless you are actually hosting meetings, display taking whatever remains, one staff member per 9 sq.m, and the number of visitors who can stand in the stall at once coming out at display area divided by 2.5.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Convention & Banquet Halls, Mohali
Banquet halls put stands close together, so the differentiator is usually light rather than size. A stand that is brighter than its neighbours reads as better finished even when it is not bigger.
The most common mistake here is treating every wall as equally valuable. One face does most of the work; identify it from the stand plan, spend the budget on it, and treat the rest as support.
The buyers at this venue tend to come from hosiery, agri machinery and bicycles. That shapes the brief more than the aesthetics do — a hosiery visitor is looking for evidence, not atmosphere.
How a build at convention & banquet halls runs
01
Read the venue pack
Before anything is drawn we ask for the organiser's pack for your edition: the stand plan with open sides marked, the build-up and dismantle windows, and the rules on height, rigging, fixing and power. At convention & banquet halls the answer that most often changes a design is the width of the narrowest door on the route and the load-in slot you have been allocated.
02
Design to the limits
Design happens against the constraints rather than around them, so split panels with concealed joints and a load declared honestly on the house distribution board is a starting condition here rather than a late revision. What you approve in 3D is therefore something that can actually be built in this room.
03
Build and test in the workshop
The stall is fabricated and then stood up in our own workshop: panels numbered, graphics trial-fitted, circuits tested and lamps aimed. Problems get found where there is time to fix them rather than at convention & banquet halls at midnight.
04
Install, hand over, strike
On site the work is assembly rather than fabrication, which is the whole point of the previous stage. At convention & banquet halls the install also covers protection on the trolley route and a strike timed against the hall's next booking, and the same crew comes back to strike the stand and clear the space.
What else is in Mohali
There is no dedicated expo hall on the Mohali list, so every show in the city borrows a room built for something else. That is the single most useful thing to know before designing a stand here: whatever the venue is, it was not designed for exhibitions, and the rules will reflect that.
Underneath the named venues sit the 11 venue categories we cover in every city, Mohali included: open exhibition grounds, mall atriums, university & college campuses, industry association halls, stadium & sports complexes, corporate campus event spaces, industrial estate expo grounds, government exhibition grounds, resort & lawn venues, 5-star hotel ballrooms and convention & banquet halls. A large share of exhibiting activity in India happens in those rooms rather than in exhibition halls, which is why they get their own pages rather than a footnote.
Every Mohali venue we cover
Build-up
Build-up, access and approvals in Mohali
Logistics in Mohali come down to three things: how the panels reach the hall, how much power the stand is allocated, and when the organiser lets you work. All three are settled in writing before we cut material.
Design, fabrication, graphics, lighting, flooring, furniture, installation and dismantle can all sit on one quote, which is usually cheaper than sourcing them separately once you account for three margins and the coordination time.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Mohali organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Exhibiting elsewhere in Punjab
Punjab is not a one-city exhibition market. We cover 6 cities in the state — Mohali, Ludhiana, Amritsar, Jalandhar, Bathinda and Patiala — with the same workshops, crews and project managers, so a programme that runs across several of them runs on one schedule rather than several.
Convention & banquet halls are not unique to Mohali either: we cover the same category in all 6 of the Punjab cities on our list, which means the access, fixing and power pattern described above travels with you. A stand built for convention & banquet halls here is usually re-skinnable for the equivalent venue in the next city rather than rebuildable.
A multi-city programme is mostly a logistics question rather than a design one. One approved drawing set, one set of reusable panels, graphics printed per city and a crew that travels with the stand — that is the whole model, and it is what keeps the per-city cost falling as the programme goes on.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Venue FAQ
Can you build at Convention & Banquet Halls, Mohali?+
Yes. We build at convention & banquet halls throughout Mohali, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Convention & Banquet Halls, Mohali cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
Can you provide AV, lighting and furniture at Convention & Banquet Halls, Mohali?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
Do you handle approvals for Convention & Banquet Halls, Mohali?+
Yes. We prepare dimensioned drawings, electrical load details and structural documents to the organiser's format, and check the design against the venue's height, rigging and fire rules before fabrication.
Who is on site during build-up at Convention & Banquet Halls, Mohali?+
A named project manager and the crew that pre-assembled the stall. They install to the drawing, hand over a working stand and return to dismantle and clear it within the organiser's window.
What are the build-up timings at Convention & Banquet Halls, Mohali?+
Build-up windows are set by the organiser for each show rather than by the venue alone, so we confirm them in writing for your edition and plan the build — including night shifts if needed — around them.
Is power included in a convention hall stand?+
The connection point and the allocation come from the organiser or the venue; the stand's internal distribution, fittings and testing are ours. We confirm the allocated load in writing before specifying lighting and AV, because an upgrade on site is slow and expensive.
How are large panels brought into a banquet hall?+
As carried sections. We measure the narrowest door and the tightest corner on the route, split large surfaces to pass both, and join them on site with concealed fittings so the finished face still reads as one surface.
Do you design differently for hosiery exhibitors here?+
Yes. Mohali's show calendar is driven by hosiery, agri machinery, bicycles, food processing and sports goods, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at another Punjab venue?+
Usually, if it is built for it. We cover 6 Punjab cities including Mohali, Ludhiana, Amritsar and Jalandhar, and a frame-and-skin stand can be stored, re-skinned with new graphics and rebuilt at the equivalent venue elsewhere in the state. Say so at design stage, because a reusable stand is detailed differently.
What is the biggest risk at convention & banquet halls?+
Discovering a constraint after fabrication. A panel that will not pass the narrowest door on the route ends up being cut in a corridor, which is the most common avoidable failure in a banquet hall. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Mohali
Other Punjab cities we cover
Exhibiting soon? Let's build your stall.