Lucknow venue
Stall fabrication at Open Exhibition Grounds, Lucknow
Open grounds where hangar-style German-tent exhibitions and trade fairs are set up.
15
Lucknow venues covered
4
Named exhibition venues
11
Venue categories
Tier 2
Uttar Pradesh market
Exhibiting at Open Exhibition Grounds, Lucknow
Open grounds where hangar-style German-tent exhibitions and trade fairs are set up. Our crews work to the organiser's build-up window at this venue, pre-assembling in the workshop so site time goes on assembly rather than fabrication.
A venue imposes a rulebook, and the stall has to be built to it: how high you can go, whether you can hang anything, what you may fix into the floor, how much power you get and which hours you can work. We read that rulebook at design stage, not at build-up.
Placed against the rest of the Lucknow list, Open Exhibition Grounds, Lucknow is the most open end of it — no walls, no ceiling, no fixed limits, and no shelter either. Knowing that before you design is what stops a stand being drawn for a hall and then built in a ballroom, which is the most expensive revision in this business.
Lucknow is a growing exhibition market rather than a mature one, and the venues reflect that: 11 venue categories plus 4 named venues. Rooms are shared with other kinds of event, so the paperwork and the hours come from whoever owns the room rather than from an exhibition operator.
Building on an open exhibition ground
An open ground is the most flexible and the most exposed option in any city. There is no door to limit panel size and usually no ceiling to limit height, because vehicles can reach the stand itself — but weather, dust, ground level and generator power all have to be designed in rather than assumed, and a hangar or German tent normally sits over the top of the whole thing.
Within Lucknow the specific room still matters: two open exhibition grounds in the same city can differ on clear height, access and power. We confirm those in writing for your edition rather than carrying an assumption from the last build.
What changes at open exhibition grounds
| Build input | At open exhibition grounds |
|---|---|
| Access route & panel sizes | Vehicles usually reach the stand itself, so panel size is limited by the truck and the crew rather than by a door. That is the one real structural advantage an open ground gives a builder. |
| Fixing method | Pegs, ballast and ground anchors, plus fixings into the hangar or tent frame where the organiser permits them. Tall elements are triangulated because there is nothing solid to lean against. |
| Power source | Generator supply with its own distribution and a backup path. Cable runs are long, so voltage drop, protected routing and crossing points across walkways are designed rather than discovered. |
| Floor protection | Raised platform flooring to level uneven ground, keep dust down and give cables a route. Underneath the platform, drainage matters as much as levelling does. |
| Build & strike hours | A longer build-up window than an indoor hall, because tenting, flooring and power all precede the stand. Daylight working is the norm and dust is continuous. |
| Weather & environment | The governing constraint. Rain, wind, heat and dust are all designed for — sealed edges, covered junctions, wind loading on anything tall, and no graphic that cannot take a shower. |
Read this as the pattern for open exhibition grounds, then check it against the organiser's pack. Where the two disagree, the pack wins and the drawing changes before the material does.
How we build for this kind of venue
- A longer build-up window because tenting, flooring and power precede the stand
- Drainage considered under the platform as carefully as the levels above it
- Weather protection and water ingress planned for, not improvised on the day
- Raised platform flooring to level the ground, seal out dust and carry cable runs
- Generator power with its own distribution and a backup path
- Panels sized by the truck and the crew rather than by a door
What to ask the organiser about open exhibition grounds
Send the organiser this list before you commission anything. Each answer removes a contingency from the quote, and at open exhibition grounds two or three of them change the structure rather than the finish.
Get these in writing before you brief anyone
- Overnight security arrangements on an open site
- Vehicle access to the stand itself, and for how long a vehicle may remain
- Whether tenting or a hangar is provided by the organiser, and the clear height under it
- Whether power is generator or mains, the allocation per stand, and the distance to the connection point
- The build-up sequence, since flooring and tenting have to be finished before stands begin
- Wind-loading limits on tall or hanging elements, and whether any are barred outright
Who exhibits at Lucknow venues, and what that changes
Leather, handicrafts, electronics, food processing and textiles account for most of the exhibiting activity in Lucknow, and the sector is a bigger design input than the brand is. A textiles visitor and a leather visitor will judge the same 18 sq.m by completely different criteria, so we brief against the sector first and the identity second.
Mixed-sector shows are the harder case. Textiles and leather visitors want opposite things from the same footprint, and the resolution is zoning rather than compromise: open display on the aisle face, a closed or semi-closed corner behind it, and storage that keeps the difference invisible.
Lucknow's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| Textiles | Textile buyers handle everything. Rail and drape capacity, a fold-and-compare table, true-colour lighting, and a lockable store for the sample ranges that leave the stand each day. |
| Leather | Leather buyers judge by hand. Open display within reach, a handling table, warm light that reads colour accurately, and a lockable store for the ranges that leave the stand daily. |
| Handicrafts | Handicraft stands sell density. Open shelving, sightlines into the stand rather than a counter across the front, and light aimed at the object instead of the ceiling. |
| Electronics | Electronics audiences expect working units, which makes clean power with surge protection, cable management that survives three show days, and glare-free screen angles the first decisions. |
| Food processing | Food processing mixes machinery with product, so you need a load-rated platform, a hygienic demo surface, a water point and a safe line between the visitor and a moving part. |
The sectors listed are the ones that drive exhibiting activity across Uttar Pradesh. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Open Exhibition Grounds, Lucknow
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Open Exhibition Grounds, Lucknow
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
Lead time is the column exhibitors underestimate. Three weeks is the base for a custom build, four from 24 sq.m and five from 54 sq.m, and those are fabrication weeks after design sign-off rather than from the day you first call. At open exhibition grounds the build-up window itself is rarely the problem; the approval and fabrication time ahead of it usually is.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Open Exhibition Grounds, Lucknow
On an open ground your competition is the sky, not the neighbouring stand. Height, a roof line of your own and lighting that still works at dusk are what make a stand findable from the far side of the ground.
The most common mistake here is treating every wall as equally valuable. One face does most of the work; identify it from the stand plan, spend the budget on it, and treat the rest as support.
The buyers at this venue tend to come from leather, handicrafts and electronics. That shapes the brief more than the aesthetics do — a leather visitor is looking for evidence, not atmosphere.
How a build at open exhibition grounds runs
01
Read the venue pack
The job starts with paperwork rather than with a concept. We want the stand plan, the access route, the power allocation and the permitted working hours in writing, and at open exhibition grounds we pay particular attention to whether tenting and flooring are provided by the organiser, and when they will be finished.
02
Design to the limits
The concept is then developed inside those limits rather than adjusted to them afterwards. At open exhibition grounds that means designing for platform flooring, sealed edges, wind loading on tall elements and generator distribution from the first sketch instead of retrofitting it to a finished drawing.
03
Build and test in the workshop
Carpentry, metalwork, spray finishing, large-format print and electrical assembly all happen in-house, and the whole stall is assembled once before it ships. That is what turns a short on-site window into enough time.
04
Install, hand over, strike
A named project manager and the crew that pre-assembled the stall install it to the drawing and hand over a working stand. Site care is part of that rather than an afterthought: levelling, dust sealing at the platform edges and covered electrical junctions. The same crew returns to dismantle and clear the stand inside the organiser's window.
What else is in Lucknow
The named venue list for Lucknow runs to 4 buildings on top of this one: Indira Gandhi Pratishthan, Indira Gandhi Planetarium Grounds, Smriti Upvan and Ram Manohar Lohia Park Grounds. Taking each name at its word, they divide into 3 open grounds and maidans and 1 event venue — which is why a stand that worked at one Lucknow venue is not automatically a stand that works at the next.
Underneath the named venues sit the 11 venue categories we cover in every city, Lucknow included: open exhibition grounds, mall atriums, university & college campuses, industry association halls, stadium & sports complexes, corporate campus event spaces, industrial estate expo grounds, government exhibition grounds, resort & lawn venues, 5-star hotel ballrooms and convention & banquet halls. A large share of exhibiting activity in India happens in those rooms rather than in exhibition halls, which is why they get their own pages rather than a footnote.
Named Lucknow venues, read by what each one calls itself
| Venue | Type read from the name | What that implies for a stand |
|---|---|---|
| Indira Gandhi Pratishthan | Event venue | The most useful thing you can do before briefing a designer is to get the stand plan, the build-up window and the venue's fixing and power rules in writing. |
| Indira Gandhi Planetarium Grounds | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
| Smriti Upvan | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
| Ram Manohar Lohia Park Grounds | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
A venue's name is a strong hint and not a specification. We confirm height, rigging, fixing, power and hours from the organiser's pack for your edition before design sign-off.
Every Lucknow venue we cover
Build-up
Build-up, access and approvals in Lucknow
Build-up in Lucknow usually runs on the organiser's schedule rather than yours, and the practical constraint is access: one loading bay shared by every exhibitor, a lift queue, and a hard stop when the hall closes. We pre-assemble in the workshop and number every panel so our time on site is assembly, not fabrication.
Everything the stand needs — structure, print, lighting, flooring, furniture, AV and the crew to install and strike it — can be bundled into a single itemised quote with one project manager behind it.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Lucknow organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Exhibiting elsewhere in Uttar Pradesh
Uttar Pradesh is not a one-city exhibition market. We cover 15 cities in the state — Lucknow, Noida, Greater Noida, Ghaziabad, Kanpur and Varanasi, plus 9 more — with the same workshops, crews and project managers, so a programme that runs across several of them runs on one schedule rather than several.
Because we cover open exhibition grounds in all 15 Uttar Pradesh cities on our list, a stand designed for this venue type is designed for the state. The structure, the fixing method and the power assumptions carry over; only the footprint and the graphics change.
A multi-city programme is mostly a logistics question rather than a design one. One approved drawing set, one set of reusable panels, graphics printed per city and a crew that travels with the stand — that is the whole model, and it is what keeps the per-city cost falling as the programme goes on.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Venue FAQ
Can you build at Open Exhibition Grounds, Lucknow?+
Yes. We build at open exhibition grounds throughout Lucknow, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Open Exhibition Grounds, Lucknow cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
What are the build-up timings at Open Exhibition Grounds, Lucknow?+
Build-up windows are set by the organiser for each show rather than by the venue alone, so we confirm them in writing for your edition and plan the build — including night shifts if needed — around them.
How early should I book for a show at Open Exhibition Grounds, Lucknow?+
Four to six weeks ahead for a custom stall and eight or more for a double-decker or pavilion. Urgent builds in seven to ten days are possible with a simplified design.
Who is on site during build-up at Open Exhibition Grounds, Lucknow?+
A named project manager and the crew that pre-assembled the stall. They install to the drawing, hand over a working stand and return to dismantle and clear it within the organiser's window.
Can you provide AV, lighting and furniture at Open Exhibition Grounds, Lucknow?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
Is build-up longer on an open ground?+
Yes. Tenting, flooring and power distribution all have to be finished before stand building starts, so the organiser's build-up period is longer than an indoor hall's and the sequence is published. We plan our arrival against that sequence rather than against the first available day.
How is power supplied on an open exhibition ground?+
Usually by generator, with distribution run out to the stands and a backup path for critical loads. We confirm the allocation and the distance to the connection point in advance, because long cable runs change both the cable specification and the cost.
Do you design differently for leather exhibitors here?+
Yes. Lucknow's show calendar is driven by leather, handicrafts, electronics, food processing and textiles, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at another Uttar Pradesh venue?+
Usually, if it is built for it. We cover 15 Uttar Pradesh cities including Lucknow, Noida, Greater Noida and Ghaziabad, and a frame-and-skin stand can be stored, re-skinned with new graphics and rebuilt at the equivalent venue elsewhere in the state. Say so at design stage, because a reusable stand is detailed differently.
What is the biggest risk at open exhibition grounds?+
Discovering a constraint after fabrication. Flooring, tenting and generator power all precede your stand on an open ground, so a crew planned in for the first available day arrives before the site is ready for them. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Lucknow
Other Uttar Pradesh cities we cover
Exhibiting soon? Let's build your stall.