Lucknow venue
Stall fabrication at Ram Manohar Lohia Park Grounds
Ram Manohar Lohia Park Grounds is one of Lucknow's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year.
15
Lucknow venues covered
4
Named exhibition venues
11
Venue categories
Tier 2
Uttar Pradesh market
Exhibiting at Ram Manohar Lohia Park Grounds
Ram Manohar Lohia Park Grounds is one of Lucknow's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year. Our crews work to the organiser's build-up window at this venue, pre-assembling in the workshop so site time goes on assembly rather than fabrication.
A venue imposes a rulebook, and the stall has to be built to it: how high you can go, whether you can hang anything, what you may fix into the floor, how much power you get and which hours you can work. We read that rulebook at design stage, not at build-up.
Placed against the rest of the Lucknow list, Ram Manohar Lohia Park Grounds is the most open end of it — no walls, no ceiling, no fixed limits, and no shelter either. Knowing that before you design is what stops a stand being drawn for a hall and then built in a ballroom, which is the most expensive revision in this business.
Lucknow is a Tier 2 exhibition market in Uttar Pradesh, which changes the venue question rather than the build quality. We cover 4 named venues here, plus 11 venue categories, so shows share their rooms with weddings, conferences and civic events and your build has to fit around bookings made before yours.
Building on an open exhibition ground
An open ground is the most flexible and the most exposed option in any city. There is no door to limit panel size and usually no ceiling to limit height, because vehicles can reach the stand itself — but weather, dust, ground level and generator power all have to be designed in rather than assumed, and a hangar or German tent normally sits over the top of the whole thing.
We treat Ram Manohar Lohia Park Grounds as an open ground or maidan for planning purposes and then confirm every figure against the organiser's exhibitor pack for your edition, because rules are issued per show rather than per building.
What changes at Ram Manohar Lohia Park Grounds
| Build input | At a venue of this kind |
|---|---|
| Access route & panel sizes | Vehicles usually reach the stand itself, so panel size is limited by the truck and the crew rather than by a door. That is the one real structural advantage an open ground gives a builder. |
| Fixing method | Pegs, ballast and ground anchors, plus fixings into the hangar or tent frame where the organiser permits them. Tall elements are triangulated because there is nothing solid to lean against. |
| Power source | Generator supply with its own distribution and a backup path. Cable runs are long, so voltage drop, protected routing and crossing points across walkways are designed rather than discovered. |
| Floor protection | Raised platform flooring to level uneven ground, keep dust down and give cables a route. Underneath the platform, drainage matters as much as levelling does. |
| Build & strike hours | A longer build-up window than an indoor hall, because tenting, flooring and power all precede the stand. Daylight working is the norm and dust is continuous. |
| Weather & environment | The governing constraint. Rain, wind, heat and dust are all designed for — sealed edges, covered junctions, wind loading on anything tall, and no graphic that cannot take a shower. |
Every row here is a design input rather than a detail. Two stands of identical area in Lucknow can need completely different engineering because these six answers differ, which is why we settle them before anything is cut.
How we build for this kind of venue
- A longer build-up window because tenting, flooring and power precede the stand
- Raised platform flooring to level the ground, seal out dust and carry cable runs
- Panels sized by the truck and the crew rather than by a door
- Weather protection and water ingress planned for, not improvised on the day
- Generator power with its own distribution and a backup path
- Drainage considered under the platform as carefully as the levels above it
What to ask the organiser about Ram Manohar Lohia Park Grounds
A quote for open ground or maidan is an estimate until these answers exist, and a price afterwards. Ask the organiser for them in writing — not because anyone is being difficult, but because the same venue issues different rules for different shows.
Get these in writing before you brief anyone
- The build-up sequence, since flooring and tenting have to be finished before stands begin
- Overnight security arrangements on an open site
- Whether tenting or a hangar is provided by the organiser, and the clear height under it
- Who is responsible for drainage and for standing water during the show
- Wind-loading limits on tall or hanging elements, and whether any are barred outright
- Whether power is generator or mains, the allocation per stand, and the distance to the connection point
Who exhibits at Lucknow venues, and what that changes
Exhibitors at Lucknow venues come mainly from leather, handicrafts, electronics, food processing and textiles — the sectors that fill Uttar Pradesh's show floors. Those audiences do not want the same stand, and at open ground or maidan the difference shows up in the build rather than in the brief: who needs a closed room, who needs a load-rated floor, who needs water and drainage, who needs nothing but a screen and two chairs.
Where a Lucknow show draws from several of those sectors at once, the stand has to serve two briefs in one footprint. Zoning does it — food processing on the open frontage where it needs to be seen, textiles in the pocket behind where it needs to be discussed — and the space plan below is where that gets decided.
Lucknow's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| Food processing | Food processing mixes machinery with product, so you need a load-rated platform, a hygienic demo surface, a water point and a safe line between the visitor and a moving part. |
| Textiles | Textile buyers handle everything. Rail and drape capacity, a fold-and-compare table, true-colour lighting, and a lockable store for the sample ranges that leave the stand each day. |
| Leather | Leather buyers judge by hand. Open display within reach, a handling table, warm light that reads colour accurately, and a lockable store for the ranges that leave the stand daily. |
| Handicrafts | Handicraft stands sell density. Open shelving, sightlines into the stand rather than a counter across the front, and light aimed at the object instead of the ceiling. |
| Electronics | Electronics audiences expect working units, which makes clean power with surge protection, cable management that survives three show days, and glare-free screen angles the first decisions. |
The sectors listed are the ones that drive exhibiting activity across Uttar Pradesh. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Ram Manohar Lohia Park Grounds
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Ram Manohar Lohia Park Grounds
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
Read the display column rather than the size column. A 36 sq.m stand carries about 28.8 sq.m of usable display once storage and a meeting corner are taken out, which is the number that decides how much product and how many people the stand can actually hold.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Ram Manohar Lohia Park Grounds
On an open ground your competition is the sky, not the neighbouring stand. Height, a roof line of your own and lighting that still works at dusk are what make a stand findable from the far side of the ground.
Plan the stand around one decision: what do you want a visitor to do in the ninety seconds they will give you? Everything else — the graphic hierarchy, where staff stand, where the product sits — follows from answering that honestly.
Because Lucknow's show calendar leans towards leather, handicrafts and electronics, the stands we build at this venue usually need to balance open display against a private corner for commercial conversations.
How a build at Ram Manohar Lohia Park Grounds runs
01
Read the venue pack
The job starts with paperwork rather than with a concept. We want the stand plan, the access route, the power allocation and the permitted working hours in writing, and at open ground or maidan we pay particular attention to whether tenting and flooring are provided by the organiser, and when they will be finished.
02
Design to the limits
Design happens against the constraints rather than around them, so platform flooring, sealed edges, wind loading on tall elements and generator distribution is a starting condition here rather than a late revision. What you approve in 3D is therefore something that can actually be built in this room.
03
Build and test in the workshop
Carpentry, metalwork, spray finishing, large-format print and electrical assembly all happen in-house, and the whole stall is assembled once before it ships. That is what turns a short on-site window into enough time.
04
Install, hand over, strike
A named project manager and the crew that pre-assembled the stall install it to the drawing and hand over a working stand. Site care is part of that rather than an afterthought: levelling, dust sealing at the platform edges and covered electrical junctions. The same crew returns to dismantle and clear the stand inside the organiser's window.
What else is in Lucknow
Lucknow gives you more than one kind of room. Alongside this page we cover 3 named exhibition venues in the city — Indira Gandhi Pratishthan, Indira Gandhi Planetarium Grounds and Smriti Upvan. Read by what each one calls itself, that list comprises 2 open grounds and maidans and 1 event venue: 2 different build specifications inside one city.
We also cover 11 venue categories in Lucknow — convention & banquet halls, open exhibition grounds, mall atriums, university & college campuses, industry association halls, stadium & sports complexes, corporate campus event spaces, industrial estate expo grounds, government exhibition grounds, resort & lawn venues and 5-star hotel ballrooms — because most Indian shows outside the top handful of cities happen in a room that was built for something else. Each of those categories has its own access, fixing and power pattern, and each gets its own page.
Named Lucknow venues, read by what each one calls itself
| Venue | Type read from the name | What that implies for a stand |
|---|---|---|
| Indira Gandhi Pratishthan | Event venue | The most useful thing you can do before briefing a designer is to get the stand plan, the build-up window and the venue's fixing and power rules in writing. |
| Indira Gandhi Planetarium Grounds | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
| Smriti Upvan | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
A venue's name is a strong hint and not a specification. We confirm height, rigging, fixing, power and hours from the organiser's pack for your edition before design sign-off.
Every Lucknow venue we cover
Build-up
Build-up, access and approvals in Lucknow
Access, lift queues and a shared loading bay decide how long a build takes in Lucknow far more than stall size does. Our crews work to the organiser's window, including night shifts where the schedule requires it, and clear the stand inside the dismantle period so no penalty lands on your deposit.
Everything the stand needs — structure, print, lighting, flooring, furniture, AV and the crew to install and strike it — can be bundled into a single itemised quote with one project manager behind it.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Lucknow organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Exhibiting elsewhere in Uttar Pradesh
Uttar Pradesh is not a one-city exhibition market. We cover 15 cities in the state — Lucknow, Noida, Greater Noida, Ghaziabad, Kanpur and Varanasi, plus 9 more — with the same workshops, crews and project managers, so a programme that runs across several of them runs on one schedule rather than several.
A stand engineered for this venue is rarely a one-show asset. Frame-and-skin construction lets the structure be stored and re-skinned for the next city, which is why the second show in a programme costs materially less than the first.
Running several cities in a season works best with one structure and several graphic sets. The panels are numbered and stored between shows, each city gets its own print and its own organiser paperwork, and the same project manager carries the job from the first show to the last.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Ram Manohar Lohia Park Grounds FAQ
Can you build at Ram Manohar Lohia Park Grounds?+
Yes. Ram Manohar Lohia Park Grounds is one of the Lucknow venues our crews work at regularly, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Ram Manohar Lohia Park Grounds cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
How early should I book for a show at Ram Manohar Lohia Park Grounds?+
Four to six weeks ahead for a custom stall and eight or more for a double-decker or pavilion. Urgent builds in seven to ten days are possible with a simplified design.
Can you work to a shell scheme at Ram Manohar Lohia Park Grounds?+
Yes. Where the organiser supplies shell scheme panels we upgrade them with printed fabric or vinyl, raised flooring, spotlights and a branded counter, which lifts the stand a long way at modest cost.
What are the build-up timings at Ram Manohar Lohia Park Grounds?+
Build-up windows are set by the organiser for each show rather than by the venue alone, so we confirm them in writing for your edition and plan the build — including night shifts if needed — around them.
Who is on site during build-up at Ram Manohar Lohia Park Grounds?+
A named project manager and the crew that pre-assembled the stall. They install to the drawing, hand over a working stand and return to dismantle and clear it within the organiser's window.
Is build-up longer on an open ground?+
Yes. Tenting, flooring and power distribution all have to be finished before stand building starts, so the organiser's build-up period is longer than an indoor hall's and the sequence is published. We plan our arrival against that sequence rather than against the first available day.
How is power supplied on an open exhibition ground?+
Usually by generator, with distribution run out to the stands and a backup path for critical loads. We confirm the allocation and the distance to the connection point in advance, because long cable runs change both the cable specification and the cost.
Do you design differently for leather exhibitors here?+
Yes. Lucknow's show calendar is driven by leather, handicrafts, electronics, food processing and textiles, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at another Uttar Pradesh venue?+
Usually, if it is built for it. We cover 15 Uttar Pradesh cities including Lucknow, Noida, Greater Noida and Ghaziabad, and a frame-and-skin stand can be stored, re-skinned with new graphics and rebuilt at the equivalent venue elsewhere in the state. Say so at design stage, because a reusable stand is detailed differently.
What is the biggest risk at open ground or maidan?+
Discovering a constraint after fabrication. Flooring, tenting and generator power all precede your stand on an open ground, so a crew planned in for the first available day arrives before the site is ready for them. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Lucknow
Other Uttar Pradesh cities we cover
Exhibiting soon? Let's build your stall.