Gurugram venue
Stall fabrication at Corporate Campus Event Spaces, Gurugram
In-campus event spaces for internal expos, vendor days and townhalls.
14
Gurugram venues covered
3
Named exhibition venues
11
Venue categories
Tier 1
Haryana market
Exhibiting at Corporate Campus Event Spaces, Gurugram
In-campus event spaces for internal expos, vendor days and townhalls. Our crews work to the organiser's build-up window at this venue, pre-assembling in the workshop so site time goes on assembly rather than fabrication.
The reason venue matters more than it looks is that it sets the limits the design has to obey — ceiling height, rigging, what you may fix to, how much power you are allocated and when you are allowed to work. We confirm those for your specific show before anything is cut, because a panel that will not pass the access door is an expensive discovery to make on site.
Of the 14 Gurugram venues we cover, this one occupies the controlled end of it — the smallest audience, the strictest access and the fastest strike. Exhibitors tend to compare venues on footfall and cost; builders compare them on access, fixing and power, and on that measure the gap between the extremes of the Gurugram list is very wide.
As a Tier 1 exhibition city, Gurugram carries 3 named venues as well as 11 venue categories, which is why two shows in the same week can need entirely different builds. The practical consequence of that density is congestion at build-up: shared bays, lift queues and a hard clearance deadline that nobody moves.
Building in a corporate campus event space
The hard part of a corporate campus event is not the stand, it is the building's routine. A space that is a thoroughfare at ten in the morning cannot be a building site at ten in the morning, so the schedule is built around occupancy and the stand is built to be assembled quietly and quickly.
Corporate campus event spaces vary from one address to the next even inside Gurugram, so the figures below are the pattern rather than the contract. The organiser's pack for your show is what we actually design to.
What changes at corporate campus event spaces
| Build input | At corporate campus event spaces |
|---|---|
| Access route & panel sizes | Goods lifts and a security desk. Crew and vehicle details go in days ahead, and panel sizes follow the lift car rather than the atrium it opens into. |
| Fixing method | Freestanding, no-drill construction on finished interiors. Nothing touches glazing, raised access flooring or the ceiling grid, which rules out most conventional bracing. |
| Power source | Office supply on the building's own boards, with facilities approving the load. Anything beyond lighting and screens needs an agreed point rather than a convenient socket. |
| Floor protection | Protection over raised access flooring and polished surfaces, plus cable matting across every walkway, because the space stays in use around the event. |
| Build & strike hours | Outside working hours in most cases, since noise and movement are restricted while the floor is occupied. The strike is fast so normal use resumes the next morning. |
| Weather & environment | Indoors throughout. The real variable is the building's routine — occupancy, not climate, decides when work can happen. |
Read this as the pattern for corporate campus event spaces, then check it against the organiser's pack. Where the two disagree, the pack wins and the drawing changes before the material does.
How we build for this kind of venue
- Nothing in contact with glazing, raised access flooring or the ceiling grid
- Electrical load approved by facilities rather than assumed from a socket
- Fast strike so the space returns to normal use the next morning
- Crew pre-cleared through site security with details submitted days ahead
- Build outside working hours wherever noise and movement are restricted
- Loads and access through goods lifts, which set the panel sizes
What to ask the organiser about corporate campus event spaces
A quote for corporate campus event spaces is an estimate until these answers exist, and a price afterwards. Ask the organiser for them in writing — not because anyone is being difficult, but because the same venue issues different rules for different shows.
Get these in writing before you brief anyone
- Permitted working hours, and whether noise is restricted while floors are occupied
- Who in facilities approves the electrical load and the connection point
- Whether the space remains a thoroughfare during the event
- Restrictions on glazing, ceiling grid, sprinklers and signage fixings
- Whether raised access flooring is present, and what may be placed on it
- Security clearance process for crew and vehicles, and the notice period required
Who exhibits at Gurugram venues, and what that changes
The sector mix in Gurugram is automobile, IT services, agri, real estate and engineering, and each of those brings its own non-negotiables onto a stand. The table below is what we design against at corporate campus event spaces before a single visual is drawn, because most of these requirements are structural or electrical rather than decorative.
Most Gurugram exhibitors are selling to more than one of those audiences, which is an argument for a layout rather than a style. Give the agri audience the frontage and the real estate audience the back corner, and the stand stops trying to be two things in the same square metre.
Gurugram's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| Agri | Agri shows mean seed, produce and inputs on open display, plus a shaded standing area — most of this audience has already walked an open ground in the sun before reaching you. |
| Real estate | Real estate sells on models and screens. A scale model on a lit plinth, large visuals at eye height, and several seated pockets where a booking conversation can run twenty minutes. |
| Engineering | An engineering audience reads drawings and specifications, so the stand needs a technical wall, a sample or cutaway to handle, and a table with chairs where a quote can actually be discussed. |
| Automobile | An automobile and components audience wants to touch the part. Plan a load-rated display platform, a cutaway or turntable at hip height, and circulation wide enough for a crowd around one vehicle. |
| IT services | An IT services audience is buying people, so the stand is mostly meeting space — demo screens on the aisle face and two or three private seating pockets behind them. |
The sectors listed are the ones that drive exhibiting activity across Haryana. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Corporate Campus Event Spaces, Gurugram
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Corporate Campus Event Spaces, Gurugram
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
Read the display column rather than the size column. A 36 sq.m stand carries about 28.8 sq.m of usable display once storage and a meeting corner are taken out, which is the number that decides how much product and how many people the stand can actually hold.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Corporate Campus Event Spaces, Gurugram
An internal audience walks past your stand several times a day, so it needs a reason to be revisited: a changing screen, a scheduled demo slot, something that is different at four in the afternoon than it was at eleven.
Visitors decide whether to enter from several metres away, so the stand has to answer "what do you do?" before it answers anything else. One legible line at eye height does more than a wall of product shots.
The buyers at this venue tend to come from automobile, IT services and agri. That shapes the brief more than the aesthetics do — an automobile visitor is looking for evidence, not atmosphere.
How a build at corporate campus event spaces runs
01
Read the venue pack
Before anything is drawn we ask for the organiser's pack for your edition: the stand plan with open sides marked, the build-up and dismantle windows, and the rules on height, rigging, fixing and power. At corporate campus event spaces the answer that most often changes a design is the security clearance lead time and the hours the floor is unoccupied.
02
Design to the limits
Design happens against the constraints rather than around them, so freestanding construction clear of glazing, raised access flooring and the ceiling grid is a starting condition here rather than a late revision. What you approve in 3D is therefore something that can actually be built in this room.
03
Build and test in the workshop
Carpentry, metalwork, spray finishing, large-format print and electrical assembly all happen in-house, and the whole stall is assembled once before it ships. That is what turns a short on-site window into enough time.
04
Install, hand over, strike
A named project manager and the crew that pre-assembled the stall install it to the drawing and hand over a working stand. Site care is part of that rather than an afterthought: cable matting across walkways and a strike that frees the space by morning. The same crew returns to dismantle and clear the stand inside the organiser's window.
What else is in Gurugram
The named venue list for Gurugram runs to 3 buildings on top of this one: Leisure Valley Grounds, Kingdom of Dreams and Aerocity & Cyber City Hotel Ballrooms. Taking each name at its word, they divide into 1 open ground or maidan, 1 event venue and 1 hotel ballroom or hotel convention hall — which is why a stand that worked at one Gurugram venue is not automatically a stand that works at the next.
We also cover 11 venue categories in Gurugram — mall atriums, university & college campuses, industry association halls, stadium & sports complexes, corporate campus event spaces, industrial estate expo grounds, government exhibition grounds, resort & lawn venues, 5-star hotel ballrooms, convention & banquet halls and open exhibition grounds — because most Indian shows outside the top handful of cities happen in a room that was built for something else. Each of those categories has its own access, fixing and power pattern, and each gets its own page.
Named Gurugram venues, read by what each one calls itself
| Venue | Type read from the name | What that implies for a stand |
|---|---|---|
| Leisure Valley Grounds | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
| Kingdom of Dreams | Event venue | The most useful thing you can do before briefing a designer is to get the stand plan, the build-up window and the venue's fixing and power rules in writing. |
| Aerocity & Cyber City Hotel Ballrooms | Hotel ballroom or hotel convention hall | Ballroom audiences are corporate and arrive in groups, so seated conversation space earns its square metres here in a way it would not at a consumer show. |
A venue's name is a strong hint and not a specification. We confirm height, rigging, fixing, power and hours from the organiser's pack for your edition before design sign-off.
Every Gurugram venue we cover
Build-up
Build-up, access and approvals in Gurugram
Logistics in Gurugram come down to three things: how the panels reach the hall, how much power the stand is allocated, and when the organiser lets you work. All three are settled in writing before we cut material.
You can take the whole scope or just part of it. Most exhibitors take design and build together and add AV and furniture to the same quote, because the alternative is reconciling three delivery schedules yourself.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Gurugram organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Exhibiting elsewhere in Haryana
Gurugram is one of 8 Haryana cities on our list, alongside Faridabad, Panchkula, Sonipat, Panipat and Karnal, plus 2 more. For an exhibitor doing a state circuit that matters practically: the structure travels, the graphics are reprinted, and nobody has to re-engineer a stand for each stop.
Because we cover corporate campus event spaces in all 8 Haryana cities on our list, a stand designed for this venue type is designed for the state. The structure, the fixing method and the power assumptions carry over; only the footprint and the graphics change.
If this venue is one stop on a programme, say so at design stage. A stand drawn to be reused is drawn differently — demountable joints, numbered panels, graphics on replaceable skins and a storage footprint that fits a standard crate — and retrofitting that later costs more than building it in.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Venue FAQ
Can you build at Corporate Campus Event Spaces, Gurugram?+
Yes. We build at corporate campus event spaces throughout Gurugram, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Corporate Campus Event Spaces, Gurugram cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
How early should I book for a show at Corporate Campus Event Spaces, Gurugram?+
Four to six weeks ahead for a custom stall and eight or more for a double-decker or pavilion. Urgent builds in seven to ten days are possible with a simplified design.
What are the build-up timings at Corporate Campus Event Spaces, Gurugram?+
Build-up windows are set by the organiser for each show rather than by the venue alone, so we confirm them in writing for your edition and plan the build — including night shifts if needed — around them.
Can you provide AV, lighting and furniture at Corporate Campus Event Spaces, Gurugram?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
Who is on site during build-up at Corporate Campus Event Spaces, Gurugram?+
A named project manager and the crew that pre-assembled the stall. They install to the drawing, hand over a working stand and return to dismantle and clear it within the organiser's window.
Who approves the electrical load for an in-campus event?+
The building's facilities team, not the event organiser. We declare the stand's load and the connection point we need in advance, because a socket that happens to be nearby is not the same thing as an approved supply.
What cannot be fixed into in a corporate campus space?+
Glazing, raised access flooring, the ceiling grid and sprinkler lines, as a rule. Builds are freestanding and weighted, which is why the structural design is settled before the visual one in these spaces.
Do you design differently for automobile exhibitors here?+
Yes. Gurugram's show calendar is driven by automobile, IT services, agri, real estate and engineering, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at another Haryana venue?+
Usually, if it is built for it. We cover 8 Haryana cities including Gurugram, Faridabad, Panchkula and Sonipat, and a frame-and-skin stand can be stored, re-skinned with new graphics and rebuilt at the equivalent venue elsewhere in the state. Say so at design stage, because a reusable stand is detailed differently.
What is the biggest risk at corporate campus event spaces?+
Discovering a constraint after fabrication. Security clearance and permitted working hours are set by the host's facilities team weeks ahead, and a crew without passes does not get into the building. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Gurugram
Other Haryana cities we cover
Exhibiting soon? Let's build your stall.