Gurugram venue
Stall fabrication at Leisure Valley Grounds
Leisure Valley Grounds is one of Gurugram's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year.
14
Gurugram venues covered
3
Named exhibition venues
11
Venue categories
Tier 1
Haryana market
Exhibiting at Leisure Valley Grounds
Leisure Valley Grounds is one of Gurugram's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year. Our crews work to the organiser's build-up window at this venue, pre-assembling in the workshop so site time goes on assembly rather than fabrication.
Two stands of identical size can need completely different engineering depending on the room they go into. Height limits, rigging availability, fixing restrictions, power allocation and build hours all change with the venue, and all of them are settled in writing before fabrication starts.
Leisure Valley Grounds sits in Gurugram's venue mix at the most open end of it — no walls, no ceiling, no fixed limits, and no shelter either. That position, more than the stall size, is what decides how the stand is engineered: the 14 venues we cover in the city span purpose-built halls, borrowed interiors and open ground, and those are three different trades rather than three versions of one.
As a Tier 1 exhibition city, Gurugram carries 3 named venues as well as 11 venue categories, which is why two shows in the same week can need entirely different builds. The practical consequence of that density is congestion at build-up: shared bays, lift queues and a hard clearance deadline that nobody moves.
Building on an open exhibition ground
Open grounds give a builder the freedom indoor venues cannot: large panels delivered to the stand, height limited by the tent rather than a slab-to-soffit figure, and a vehicle alongside the build for as long as it is needed. The trade is that the specification has to survive rain, wind, heat and dust for the length of the show.
We treat Leisure Valley Grounds as an open ground or maidan for planning purposes and then confirm every figure against the organiser's exhibitor pack for your edition, because rules are issued per show rather than per building.
What changes at Leisure Valley Grounds
| Build input | At a venue of this kind |
|---|---|
| Access route & panel sizes | Vehicles usually reach the stand itself, so panel size is limited by the truck and the crew rather than by a door. That is the one real structural advantage an open ground gives a builder. |
| Fixing method | Pegs, ballast and ground anchors, plus fixings into the hangar or tent frame where the organiser permits them. Tall elements are triangulated because there is nothing solid to lean against. |
| Power source | Generator supply with its own distribution and a backup path. Cable runs are long, so voltage drop, protected routing and crossing points across walkways are designed rather than discovered. |
| Floor protection | Raised platform flooring to level uneven ground, keep dust down and give cables a route. Underneath the platform, drainage matters as much as levelling does. |
| Build & strike hours | A longer build-up window than an indoor hall, because tenting, flooring and power all precede the stand. Daylight working is the norm and dust is continuous. |
| Weather & environment | The governing constraint. Rain, wind, heat and dust are all designed for — sealed edges, covered junctions, wind loading on anything tall, and no graphic that cannot take a shower. |
These six are the ones that change the stand rather than the drawing. Confirm them for your edition with the organiser and we will design to the answers; where an answer is unavailable we design to the conservative assumption and revise once it arrives.
How we build for this kind of venue
- Raised platform flooring to level the ground, seal out dust and carry cable runs
- Panels sized by the truck and the crew rather than by a door
- Drainage considered under the platform as carefully as the levels above it
- Wind loading accounted for on every tall, hanging or fabric element
- Weather protection and water ingress planned for, not improvised on the day
- Generator power with its own distribution and a backup path
What to ask the organiser about Leisure Valley Grounds
Most of what goes wrong at open ground or maidan goes wrong because a question was not asked early. These are the ones worth asking before you brief a designer, let alone a fabricator.
Get these in writing before you brief anyone
- Wind-loading limits on tall or hanging elements, and whether any are barred outright
- The ground surface — levelled earth, hardstanding or turf — and whether pegging is permitted
- Whether tenting or a hangar is provided by the organiser, and the clear height under it
- Overnight security arrangements on an open site
- Who is responsible for drainage and for standing water during the show
- Vehicle access to the stand itself, and for how long a vehicle may remain
Who exhibits at Gurugram venues, and what that changes
Exhibitors at Gurugram venues come mainly from automobile, IT services, agri, real estate and engineering — the sectors that fill Haryana's show floors. Those audiences do not want the same stand, and at open ground or maidan the difference shows up in the build rather than in the brief: who needs a closed room, who needs a load-rated floor, who needs water and drainage, who needs nothing but a screen and two chairs.
Mixed-sector shows are the harder case. Engineering and automobile visitors want opposite things from the same footprint, and the resolution is zoning rather than compromise: open display on the aisle face, a closed or semi-closed corner behind it, and storage that keeps the difference invisible.
Gurugram's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| Engineering | An engineering audience reads drawings and specifications, so the stand needs a technical wall, a sample or cutaway to handle, and a table with chairs where a quote can actually be discussed. |
| Automobile | An automobile and components audience wants to touch the part. Plan a load-rated display platform, a cutaway or turntable at hip height, and circulation wide enough for a crowd around one vehicle. |
| IT services | An IT services audience is buying people, so the stand is mostly meeting space — demo screens on the aisle face and two or three private seating pockets behind them. |
| Agri | Agri shows mean seed, produce and inputs on open display, plus a shaded standing area — most of this audience has already walked an open ground in the sun before reaching you. |
| Real estate | Real estate sells on models and screens. A scale model on a lit plinth, large visuals at eye height, and several seated pockets where a booking conversation can run twenty minutes. |
The sectors listed are the ones that drive exhibiting activity across Haryana. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Leisure Valley Grounds
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Leisure Valley Grounds
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
The figures are the same ones our stall planner uses, so a quote can be checked against them line by line: storage at 10% of the area up to 18 sq.m and 15% above it, a meeting corner at 5% unless you are actually hosting meetings, display taking whatever remains, one staff member per 9 sq.m, and the number of visitors who can stand in the stall at once coming out at display area divided by 2.5.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Leisure Valley Grounds
Open-ground visitors arrive hot, dusty and already tired of walking. A shaded standing area with somewhere to put a bag converts better than another graphic wall, and it costs less.
Height and light are what buy visibility in a shared hall. Where the venue allows it, go up — a tall brand element or a hanging banner is read from across the floor in a way that floor-level graphics never are.
Because Gurugram's show calendar leans towards automobile, IT services and agri, the stands we build at this venue usually need to balance open display against a private corner for commercial conversations.
How a build at Leisure Valley Grounds runs
01
Read the venue pack
Before anything is drawn we ask for the organiser's pack for your edition: the stand plan with open sides marked, the build-up and dismantle windows, and the rules on height, rigging, fixing and power. At open ground or maidan the answer that most often changes a design is whether tenting and flooring are provided by the organiser, and when they will be finished.
02
Design to the limits
Design happens against the constraints rather than around them, so platform flooring, sealed edges, wind loading on tall elements and generator distribution is a starting condition here rather than a late revision. What you approve in 3D is therefore something that can actually be built in this room.
03
Build and test in the workshop
The stall is fabricated and then stood up in our own workshop: panels numbered, graphics trial-fitted, circuits tested and lamps aimed. Problems get found where there is time to fix them rather than at open ground or maidan at midnight.
04
Install, hand over, strike
On site the work is assembly rather than fabrication, which is the whole point of the previous stage. At open ground or maidan the install also covers levelling, dust sealing at the platform edges and covered electrical junctions, and the same crew comes back to strike the stand and clear the space.
What else is in Gurugram
The named venue list for Gurugram runs to 2 buildings on top of this one: Kingdom of Dreams and Aerocity & Cyber City Hotel Ballrooms. Taking each name at its word, they divide into 1 event venue and 1 hotel ballroom or hotel convention hall — which is why a stand that worked at one Gurugram venue is not automatically a stand that works at the next.
Underneath the named venues sit the 11 venue categories we cover in every city, Gurugram included: government exhibition grounds, resort & lawn venues, 5-star hotel ballrooms, convention & banquet halls, open exhibition grounds, mall atriums, university & college campuses, industry association halls, stadium & sports complexes, corporate campus event spaces and industrial estate expo grounds. A large share of exhibiting activity in India happens in those rooms rather than in exhibition halls, which is why they get their own pages rather than a footnote.
Named Gurugram venues, read by what each one calls itself
| Venue | Type read from the name | What that implies for a stand |
|---|---|---|
| Kingdom of Dreams | Event venue | The most useful thing you can do before briefing a designer is to get the stand plan, the build-up window and the venue's fixing and power rules in writing. |
| Aerocity & Cyber City Hotel Ballrooms | Hotel ballroom or hotel convention hall | Ballroom audiences are corporate and arrive in groups, so seated conversation space earns its square metres here in a way it would not at a consumer show. |
A venue's name is a strong hint and not a specification. We confirm height, rigging, fixing, power and hours from the organiser's pack for your edition before design sign-off.
Every Gurugram venue we cover
Build-up
Build-up, access and approvals in Gurugram
Build-up in Gurugram usually runs on the organiser's schedule rather than yours, and the practical constraint is access: one loading bay shared by every exhibitor, a lift queue, and a hard stop when the hall closes. We pre-assemble in the workshop and number every panel so our time on site is assembly, not fabrication.
Everything the stand needs — structure, print, lighting, flooring, furniture, AV and the crew to install and strike it — can be bundled into a single itemised quote with one project manager behind it.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Gurugram organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Exhibiting elsewhere in Haryana
Beyond Gurugram we build in 7 other Haryana cities: Faridabad, Panchkula, Sonipat, Panipat, Karnal and Ambala, plus 1 others. Same drawings, same workshop, same project manager — which is what makes a second city cheaper than the first rather than a repeat of it.
A stand engineered for this venue is rarely a one-show asset. Frame-and-skin construction lets the structure be stored and re-skinned for the next city, which is why the second show in a programme costs materially less than the first.
A multi-city programme is mostly a logistics question rather than a design one. One approved drawing set, one set of reusable panels, graphics printed per city and a crew that travels with the stand — that is the whole model, and it is what keeps the per-city cost falling as the programme goes on.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Leisure Valley Grounds FAQ
Can you build at Leisure Valley Grounds?+
Yes. Leisure Valley Grounds is one of the Gurugram venues our crews work at regularly, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Leisure Valley Grounds cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
How early should I book for a show at Leisure Valley Grounds?+
Four to six weeks ahead for a custom stall and eight or more for a double-decker or pavilion. Urgent builds in seven to ten days are possible with a simplified design.
Can you work to a shell scheme at Leisure Valley Grounds?+
Yes. Where the organiser supplies shell scheme panels we upgrade them with printed fabric or vinyl, raised flooring, spotlights and a branded counter, which lifts the stand a long way at modest cost.
Do you handle approvals for Leisure Valley Grounds?+
Yes. We prepare dimensioned drawings, electrical load details and structural documents to the organiser's format, and check the design against the venue's height, rigging and fire rules before fabrication.
Can you provide AV, lighting and furniture at Leisure Valley Grounds?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
What happens to an open-ground stand if it rains?+
A stand designed for the site takes it. Platform flooring lifts the build clear of standing water, edges are sealed, electrical junctions are covered, and graphics are specified in materials that tolerate a wetting rather than paper-faced boards that do not.
How is power supplied on an open exhibition ground?+
Usually by generator, with distribution run out to the stands and a backup path for critical loads. We confirm the allocation and the distance to the connection point in advance, because long cable runs change both the cable specification and the cost.
Do you design differently for automobile exhibitors here?+
Yes. Gurugram's show calendar is driven by automobile, IT services, agri, real estate and engineering, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at another Haryana venue?+
Usually, if it is built for it. We cover 8 Haryana cities including Gurugram, Faridabad, Panchkula and Sonipat, and a frame-and-skin stand can be stored, re-skinned with new graphics and rebuilt at the equivalent venue elsewhere in the state. Say so at design stage, because a reusable stand is detailed differently.
What is the biggest risk at open ground or maidan?+
Discovering a constraint after fabrication. Flooring, tenting and generator power all precede your stand on an open ground, so a crew planned in for the first available day arrives before the site is ready for them. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Gurugram
Other Haryana cities we cover
Exhibiting soon? Let's build your stall.