Kochi venue
Stall fabrication at Lulu Bolgatty International Convention Centre
Lulu Bolgatty International Convention Centre is one of Kochi's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year.
15
Kochi venues covered
4
Named exhibition venues
11
Venue categories
Tier 2
Kerala market
Exhibiting at Lulu Bolgatty International Convention Centre
Lulu Bolgatty International Convention Centre is one of Kochi's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year. Our crews work to the organiser's build-up window at this venue, pre-assembling in the workshop so site time goes on assembly rather than fabrication.
Two stands of identical size can need completely different engineering depending on the room they go into. Height limits, rigging availability, fixing restrictions, power allocation and build hours all change with the venue, and all of them are settled in writing before fabrication starts.
Of the 15 Kochi venues we cover, this one occupies the practical middle of it — clear span and usable height, bought at the price of a single shared door. Exhibitors tend to compare venues on footfall and cost; builders compare them on access, fixing and power, and on that measure the gap between the extremes of the Kochi list is very wide.
As a Tier 2 market in Kerala, Kochi runs a thinner and more seasonal show calendar across 11 venue categories and 4 named venues. That usually means a shorter build window, a venue in use the day before, and a strike timed against the next booking rather than the next show.
Building in a convention or banquet hall
Pillar-less convention and banquet halls are the workhorses of consumer expos, dealer meets and B2B shows. They give you width, a reasonable ceiling and a long sightline down the aisle, and they take away the loading bay — access is usually a single pair of doors off a corridor shared with every other exhibitor. The widest panel on the stand is therefore decided by the narrowest door on the route.
Lulu Bolgatty International Convention Centre is read here as a convention centre, which is how we plan a build until the organiser's pack for your edition says otherwise. The pack is what settles height, rigging, fixing, power and hours for a specific show, and the same building can issue different rules for two shows in the same month.
What changes at Lulu Bolgatty International Convention Centre
| Build input | At a venue of this kind |
|---|---|
| Access route & panel sizes | Often a single pair of doors and a shared corridor rather than a loading bay. The narrowest door on the route sets the widest panel, so large surfaces are split into carried sections joined on site. |
| Fixing method | Freestanding construction on a finished floor. Walls and columns stay untouched, and where height is needed it is braced back into the stand itself rather than into the hall. |
| Power source | House distribution boards, with a load figure confirmed in advance. When several stands share one board, the stand that declared its load honestly is the one that stays lit. |
| Floor protection | Protection wherever trolleys run and under anything heavy or wheeled. Raised platform flooring also gives cables a route when the floor cannot be chased or taped. |
| Build & strike hours | A booked, sequenced slot, because every exhibitor comes through the same door. Dismantle is timed against the hall's next booking, which is often tighter than the show's own schedule. |
| Weather & environment | Indoors, so the variables are air-conditioning and the door line. A stand beside an entrance takes heat, dust and a draught every time the doors open. |
Every row here is a design input rather than a detail. Two stands of identical area in Kochi can need completely different engineering because these six answers differ, which is why we settle them before anything is cut.
How we build for this kind of venue
- A booked, sequenced load-in slot because every exhibitor shares one access point
- Dismantle scheduled against the hall's next booking rather than against the show
- Freestanding construction braced back into the stand rather than into the hall
- Raised platform flooring where cable runs cannot be chased into the floor
- Panel sizes set by the widest door on the route, not by the width of the hall
- Power drawn from house distribution with the stand's load confirmed in advance
What to ask the organiser about Lulu Bolgatty International Convention Centre
Send the organiser this list before you commission anything. Each answer removes a contingency from the quote, and at convention centre two or three of them change the structure rather than the finish.
Get these in writing before you brief anyone
- The dimensions of the widest door on the route in, and whether a dock or ramp exists at all
- Whether the hall has another booking immediately after the show, and the hard clearance time
- The load-in slot allocated to your stand, and the order exhibitors are called in
- Fire-retardancy documentation the venue or organiser will ask to see
- The power allocation per stand and which distribution board it comes from
- Floor-protection requirements and whether trolleys are permitted on the finished floor
Who exhibits at Kochi venues, and what that changes
Spices, tourism, seafood, coir and ayurveda account for most of the exhibiting activity in Kochi, and the sector is a bigger design input than the brand is. A spices visitor and a tourism visitor will judge the same 18 sq.m by completely different criteria, so we brief against the sector first and the identity second.
Most Kochi exhibitors are selling to more than one of those audiences, which is an argument for a layout rather than a style. Give the spices audience the frontage and the tourism audience the back corner, and the stand stops trying to be two things in the same square metre.
Kochi's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| Spices | Spice stands work on aroma and colour. Open sample jars within reach, sealed bulk storage, good top light, and a counter where grades and quantities can be discussed. |
| Tourism | Tourism stands sell a place. Large imagery high up, a literature counter, seating for an itinerary conversation, and screen content that reads from the aisle without sound. |
| Seafood | Seafood exhibitors often need chilled display, which means a drained wet area, a dedicated power point for refrigeration, ventilation and a wipe-clean counter. |
| Coir | Coir products are bulky and tactile. Open stacking, a handling table and generous top light do more than cabinetry, because the audience is buying texture. |
| Ayurveda | Ayurveda exhibitors sell provenance and trust, so the stand needs a clean dispensing counter, labelled product on open shelving, and a private corner for a consultation. |
The sectors listed are the ones that drive exhibiting activity across Kerala. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Lulu Bolgatty International Convention Centre
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Lulu Bolgatty International Convention Centre
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
Lead time is the column exhibitors underestimate. Three weeks is the base for a custom build, four from 24 sq.m and five from 54 sq.m, and those are fabrication weeks after design sign-off rather than from the day you first call. At convention centre the build-up window itself is rarely the problem; the approval and fabrication time ahead of it usually is.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Lulu Bolgatty International Convention Centre
A pillar-less hall gives you a long sightline down the aisle, which makes the face that reads from thirty metres away worth more than the one a visitor sees standing in front of you. Design the far view first.
Visitors decide whether to enter from several metres away, so the stand has to answer "what do you do?" before it answers anything else. One legible line at eye height does more than a wall of product shots.
The buyers at this venue tend to come from spices, tourism and seafood. That shapes the brief more than the aesthetics do — a spices visitor is looking for evidence, not atmosphere.
How a build at Lulu Bolgatty International Convention Centre runs
01
Read the venue pack
Before anything is drawn we ask for the organiser's pack for your edition: the stand plan with open sides marked, the build-up and dismantle windows, and the rules on height, rigging, fixing and power. At convention centre the answer that most often changes a design is the width of the narrowest door on the route and the load-in slot you have been allocated.
02
Design to the limits
The concept is then developed inside those limits rather than adjusted to them afterwards. At convention centre that means designing for split panels with concealed joints and a load declared honestly on the house distribution board from the first sketch instead of retrofitting it to a finished drawing.
03
Build and test in the workshop
Carpentry, metalwork, spray finishing, large-format print and electrical assembly all happen in-house, and the whole stall is assembled once before it ships. That is what turns a short on-site window into enough time.
04
Install, hand over, strike
A named project manager and the crew that pre-assembled the stall install it to the drawing and hand over a working stand. Site care is part of that rather than an afterthought: protection on the trolley route and a strike timed against the hall's next booking. The same crew returns to dismantle and clear the stand inside the organiser's window.
What else is in Kochi
We cover 3 other named exhibition venues in Kochi: Adlux International Convention & Exhibition Centre, CIAL Trade Fair & Exhibition Centre and Rajiv Gandhi Indoor Stadium. By name they break down into 2 purpose-built exhibition and trade centres and 1 indoor stadium or arena, and the gap between the easiest and the hardest of those to build in is larger than any gap in stall size.
We also cover 11 venue categories in Kochi — open exhibition grounds, mall atriums, university & college campuses, industry association halls, stadium & sports complexes, corporate campus event spaces, industrial estate expo grounds, government exhibition grounds, resort & lawn venues, 5-star hotel ballrooms and convention & banquet halls — because most Indian shows outside the top handful of cities happen in a room that was built for something else. Each of those categories has its own access, fixing and power pattern, and each gets its own page.
Named Kochi venues, read by what each one calls itself
| Venue | Type read from the name | What that implies for a stand |
|---|---|---|
| Adlux International Convention & Exhibition Centre | Purpose-built exhibition or trade centre | Hall shows are walked at pace along long aisles, so the stand has to answer what you do from twenty metres and why it matters from two. |
| CIAL Trade Fair & Exhibition Centre | Purpose-built exhibition or trade centre | Hall shows are walked at pace along long aisles, so the stand has to answer what you do from twenty metres and why it matters from two. |
| Rajiv Gandhi Indoor Stadium | Indoor stadium or arena | In a volume this large a stand reads as small unless it builds upward or lights upward. |
A venue's name is a strong hint and not a specification. We confirm height, rigging, fixing, power and hours from the organiser's pack for your edition before design sign-off.
Every Kochi venue we cover
Build-up
Build-up, access and approvals in Kochi
Every Kochi venue issues its own build-up schedule, power allocation and list of what you may and may not fix to the structure. We read it before fabrication, because a panel that will not fit through the access door is an expensive thing to discover at the venue.
Design, fabrication, graphics, lighting, flooring, furniture, installation and dismantle can all sit on one quote, which is usually cheaper than sourcing them separately once you account for three margins and the coordination time.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Kochi organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Exhibiting elsewhere in Kerala
Beyond Kochi we build in 3 other Kerala cities: Thiruvananthapuram, Kozhikode and Thrissur. Same drawings, same workshop, same project manager — which is what makes a second city cheaper than the first rather than a repeat of it.
A stand engineered for this venue is rarely a one-show asset. Frame-and-skin construction lets the structure be stored and re-skinned for the next city, which is why the second show in a programme costs materially less than the first.
Running several cities in a season works best with one structure and several graphic sets. The panels are numbered and stored between shows, each city gets its own print and its own organiser paperwork, and the same project manager carries the job from the first show to the last.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Lulu Bolgatty International Convention Centre FAQ
Can you build at Lulu Bolgatty International Convention Centre?+
Yes. Lulu Bolgatty International Convention Centre is one of the Kochi venues our crews work at regularly, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Lulu Bolgatty International Convention Centre cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
Can you provide AV, lighting and furniture at Lulu Bolgatty International Convention Centre?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
Who is on site during build-up at Lulu Bolgatty International Convention Centre?+
A named project manager and the crew that pre-assembled the stall. They install to the drawing, hand over a working stand and return to dismantle and clear it within the organiser's window.
What are the build-up timings at Lulu Bolgatty International Convention Centre?+
Build-up windows are set by the organiser for each show rather than by the venue alone, so we confirm them in writing for your edition and plan the build — including night shifts if needed — around them.
How early should I book for a show at Lulu Bolgatty International Convention Centre?+
Four to six weeks ahead for a custom stall and eight or more for a double-decker or pavilion. Urgent builds in seven to ten days are possible with a simplified design.
How are large panels brought into a banquet hall?+
As carried sections. We measure the narrowest door and the tightest corner on the route, split large surfaces to pass both, and join them on site with concealed fittings so the finished face still reads as one surface.
What decides the dismantle deadline in a banquet hall?+
The hall's next booking, more often than the show. We confirm the hard clearance time in writing and plan the strike backwards from it, including a night shift where the gap between events requires one.
Do you design differently for spices exhibitors here?+
Yes. Kochi's show calendar is driven by spices, tourism, seafood, coir and ayurveda, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at another Kerala venue?+
Usually, if it is built for it. We cover 4 Kerala cities including Kochi, Thiruvananthapuram, Kozhikode and Thrissur, and a frame-and-skin stand can be stored, re-skinned with new graphics and rebuilt at the equivalent venue elsewhere in the state. Say so at design stage, because a reusable stand is detailed differently.
What is the biggest risk at convention centre?+
Discovering a constraint after fabrication. A panel that will not pass the narrowest door on the route ends up being cut in a corridor, which is the most common avoidable failure in a banquet hall. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Kochi
Other Kerala cities we cover
Exhibiting soon? Let's build your stall.