Kochi venue
Stall fabrication at Rajiv Gandhi Indoor Stadium
Rajiv Gandhi Indoor Stadium is one of Kochi's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year.
15
Kochi venues covered
4
Named exhibition venues
11
Venue categories
Tier 2
Kerala market
Exhibiting at Rajiv Gandhi Indoor Stadium
Rajiv Gandhi Indoor Stadium is one of Kochi's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year. We design, fabricate, install and dismantle stalls here, with the organiser drawings and approvals prepared as part of the project rather than quoted as an extra.
Two stands of identical size can need completely different engineering depending on the room they go into. Height limits, rigging availability, fixing restrictions, power allocation and build hours all change with the venue, and all of them are settled in writing before fabrication starts.
Placed against the rest of the Kochi list, Rajiv Gandhi Indoor Stadium is the volume end of it — the widest floor and the biggest crowd, with the least permission to touch anything. Knowing that before you design is what stops a stand being drawn for a hall and then built in a ballroom, which is the most expensive revision in this business.
As a Tier 2 market in Kerala, Kochi runs a thinner and more seasonal show calendar across 11 venue categories and 4 named venues. That usually means a shorter build window, a venue in use the day before, and a strike timed against the next booking rather than the next show.
Building in a stadium or sports complex
Indoor stadiums and sports complexes take large consumer and government expos, and the floor is the constraint that governs everything. A playing surface needs full protection, point loads have to be spread across load-distributing bases, and access runs through service tunnels and player entrances sized for sports equipment rather than exhibition freight — so the tunnel height, not the arena height, decides the tallest piece that can be carried in.
We treat Rajiv Gandhi Indoor Stadium as an indoor stadium or arena for planning purposes and then confirm every figure against the organiser's exhibitor pack for your edition, because rules are issued per show rather than per building.
What changes at Rajiv Gandhi Indoor Stadium
| Build input | At a venue of this kind |
|---|---|
| Access route & panel sizes | Service tunnels and player entrances, sized for sports equipment rather than exhibition freight. The tunnel's clear height, not the arena's, sets the tallest piece that can be carried in. |
| Fixing method | Nothing fixed to the structure or the surface. Point loads are spread across load-distributing bases, and tall elements are ballasted and guyed back into the stand itself. |
| Power source | Event distribution rather than house supply, often from a temporary board. The allocation is per stand and worth confirming before any AV is specified. |
| Floor protection | Full protection over the playing surface — interlocking deck or boards under the entire footprint — with wheeled loads confined to protected routes. |
| Build & strike hours | Tight, and dictated by the sporting calendar rather than by the show. Dismantle windows here are frequently shorter than build-up. |
| Weather & environment | An indoor arena is sheltered; the open stands and the surrounding complex are not. A show that spans both is really two builds under one contract. |
Read this as the pattern for indoor stadium or arena, then check it against the organiser's pack. Where the two disagree, the pack wins and the drawing changes before the material does.
How we build for this kind of venue
- Point loads spread across load-distributing bases rather than concentrated
- Nothing fixed to the structure — tall elements ballasted and guyed into the stand
- Stand open sides oriented to the main circulation route rather than the nearest wall
- Power from event distribution rather than house supply
- Access through service tunnels sized by their own height, not the arena's
- Wheeled loads confined to protected routes only
What to ask the organiser about Rajiv Gandhi Indoor Stadium
Most of what goes wrong at indoor stadium or arena goes wrong because a question was not asked early. These are the ones worth asking before you brief a designer, let alone a fabricator.
Get these in writing before you brief anyone
- Whether seating areas and the surrounding complex form part of the show footprint
- The permitted point load on the surface, and whether load-spreading bases are mandated
- Where the event power distribution sits and what allocation each stand receives
- Tunnel and service-entrance dimensions, including clear height along the whole route
- Whether anything may be suspended from the roof structure, and through whom
- Which routes wheeled loads may use across the floor
Who exhibits at Kochi venues, and what that changes
Spices, tourism, seafood, coir and ayurveda account for most of the exhibiting activity in Kochi, and the sector is a bigger design input than the brand is. A seafood visitor and a coir visitor will judge the same 18 sq.m by completely different criteria, so we brief against the sector first and the identity second.
Where a Kochi show draws from several of those sectors at once, the stand has to serve two briefs in one footprint. Zoning does it — seafood on the open frontage where it needs to be seen, coir in the pocket behind where it needs to be discussed — and the space plan below is where that gets decided.
Kochi's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| Seafood | Seafood exhibitors often need chilled display, which means a drained wet area, a dedicated power point for refrigeration, ventilation and a wipe-clean counter. |
| Coir | Coir products are bulky and tactile. Open stacking, a handling table and generous top light do more than cabinetry, because the audience is buying texture. |
| Ayurveda | Ayurveda exhibitors sell provenance and trust, so the stand needs a clean dispensing counter, labelled product on open shelving, and a private corner for a consultation. |
| Spices | Spice stands work on aroma and colour. Open sample jars within reach, sealed bulk storage, good top light, and a counter where grades and quantities can be discussed. |
| Tourism | Tourism stands sell a place. Large imagery high up, a literature counter, seating for an itinerary conversation, and screen content that reads from the aisle without sound. |
The sectors listed are the ones that drive exhibiting activity across Kerala. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Rajiv Gandhi Indoor Stadium
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Rajiv Gandhi Indoor Stadium
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
The figures are the same ones our stall planner uses, so a quote can be checked against them line by line: storage at 10% of the area up to 18 sq.m and 15% above it, a meeting corner at 5% unless you are actually hosting meetings, display taking whatever remains, one staff member per 9 sq.m, and the number of visitors who can stand in the stall at once coming out at display area divided by 2.5.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Rajiv Gandhi Indoor Stadium
Stadium shows move a lot of visitors across a wide floor in both directions, so plan flow rather than frontage. Keep the open sides facing the main circulation route and accept that the wall side is storage.
The stand strategy at a venue like this starts with where visitors come from. Work out which direction the main flow arrives from, put your strongest visual on that face, and keep the entry corner clear so people can step in without committing to a conversation.
Exhibitors here come largely from spices, tourism and seafood, and a spices audience has specific expectations: product visible, specification available, and somewhere to talk without shouting. We design for that rather than applying a generic layout.
How a build at Rajiv Gandhi Indoor Stadium runs
01
Read the venue pack
The job starts with paperwork rather than with a concept. We want the stand plan, the access route, the power allocation and the permitted working hours in writing, and at indoor stadium or arena we pay particular attention to the clear height of the service tunnel and who supplies surface protection.
02
Design to the limits
The concept is then developed inside those limits rather than adjusted to them afterwards. At indoor stadium or arena that means designing for load-spreading bases, full surface protection and pieces that pass a service tunnel from the first sketch instead of retrofitting it to a finished drawing.
03
Build and test in the workshop
The stall is fabricated and then stood up in our own workshop: panels numbered, graphics trial-fitted, circuits tested and lamps aimed. Problems get found where there is time to fix them rather than at indoor stadium or arena at midnight.
04
Install, hand over, strike
A named project manager and the crew that pre-assembled the stall install it to the drawing and hand over a working stand. Site care is part of that rather than an afterthought: full protection over the playing surface and wheeled loads kept to protected routes. The same crew returns to dismantle and clear the stand inside the organiser's window.
What else is in Kochi
The named venue list for Kochi runs to 3 buildings on top of this one: Adlux International Convention & Exhibition Centre, Lulu Bolgatty International Convention Centre and CIAL Trade Fair & Exhibition Centre. Taking each name at its word, they divide into 2 purpose-built exhibition and trade centres and 1 convention centre — which is why a stand that worked at one Kochi venue is not automatically a stand that works at the next.
Underneath the named venues sit the 11 venue categories we cover in every city, Kochi included: corporate campus event spaces, industrial estate expo grounds, government exhibition grounds, resort & lawn venues, 5-star hotel ballrooms, convention & banquet halls, open exhibition grounds, mall atriums, university & college campuses, industry association halls and stadium & sports complexes. A large share of exhibiting activity in India happens in those rooms rather than in exhibition halls, which is why they get their own pages rather than a footnote.
Named Kochi venues, read by what each one calls itself
| Venue | Type read from the name | What that implies for a stand |
|---|---|---|
| Adlux International Convention & Exhibition Centre | Purpose-built exhibition or trade centre | Hall shows are walked at pace along long aisles, so the stand has to answer what you do from twenty metres and why it matters from two. |
| Lulu Bolgatty International Convention Centre | Convention centre | Banquet halls put stands close together, so the differentiator is usually light rather than size. |
| CIAL Trade Fair & Exhibition Centre | Purpose-built exhibition or trade centre | Hall shows are walked at pace along long aisles, so the stand has to answer what you do from twenty metres and why it matters from two. |
A venue's name is a strong hint and not a specification. We confirm height, rigging, fixing, power and hours from the organiser's pack for your edition before design sign-off.
Every Kochi venue we cover
Build-up
Build-up, access and approvals in Kochi
Logistics in Kochi come down to three things: how the panels reach the hall, how much power the stand is allocated, and when the organiser lets you work. All three are settled in writing before we cut material.
Design, fabrication, graphics, lighting, flooring, furniture, installation and dismantle can all sit on one quote, which is usually cheaper than sourcing them separately once you account for three margins and the coordination time.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Kochi organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Exhibiting elsewhere in Kerala
Beyond Kochi we build in 3 other Kerala cities: Thiruvananthapuram, Kozhikode and Thrissur. Same drawings, same workshop, same project manager — which is what makes a second city cheaper than the first rather than a repeat of it.
A stand engineered for this venue is rarely a one-show asset. Frame-and-skin construction lets the structure be stored and re-skinned for the next city, which is why the second show in a programme costs materially less than the first.
Running several cities in a season works best with one structure and several graphic sets. The panels are numbered and stored between shows, each city gets its own print and its own organiser paperwork, and the same project manager carries the job from the first show to the last.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Rajiv Gandhi Indoor Stadium FAQ
Can you build at Rajiv Gandhi Indoor Stadium?+
Yes. Rajiv Gandhi Indoor Stadium is one of the Kochi venues our crews work at regularly, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Rajiv Gandhi Indoor Stadium cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
Do you handle approvals for Rajiv Gandhi Indoor Stadium?+
Yes. We prepare dimensioned drawings, electrical load details and structural documents to the organiser's format, and check the design against the venue's height, rigging and fire rules before fabrication.
Who is on site during build-up at Rajiv Gandhi Indoor Stadium?+
A named project manager and the crew that pre-assembled the stall. They install to the drawing, hand over a working stand and return to dismantle and clear it within the organiser's window.
How early should I book for a show at Rajiv Gandhi Indoor Stadium?+
Four to six weeks ahead for a custom stall and eight or more for a double-decker or pavilion. Urgent builds in seven to ten days are possible with a simplified design.
Can you provide AV, lighting and furniture at Rajiv Gandhi Indoor Stadium?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
What limits the size of a stand brought into a stadium?+
The service tunnel rather than the arena. Tunnels and player entrances are sized for sports equipment, so their clear height and width decide the tallest and widest piece that can be carried in, however much room the floor itself has.
How is a stadium floor protected during an expo?+
With interlocking deck or protection boards across the entire stand footprint, and wheeled loads kept to protected routes only. Point loads are spread across load-distributing bases so no leg concentrates weight on the surface beneath it.
Do you design differently for spices exhibitors here?+
Yes. Kochi's show calendar is driven by spices, tourism, seafood, coir and ayurveda, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at another Kerala venue?+
Usually, if it is built for it. We cover 4 Kerala cities including Kochi, Thiruvananthapuram, Kozhikode and Thrissur, and a frame-and-skin stand can be stored, re-skinned with new graphics and rebuilt at the equivalent venue elsewhere in the state. Say so at design stage, because a reusable stand is detailed differently.
What is the biggest risk at indoor stadium or arena?+
Discovering a constraint after fabrication. The service tunnel rather than the arena limits what can be carried in, and a piece that will not pass it never reaches the floor at all. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Kochi
Other Kerala cities we cover
Exhibiting soon? Let's build your stall.