Hyderabad venue
Stall fabrication at Open Exhibition Grounds, Hyderabad
Open grounds where hangar-style German-tent exhibitions and trade fairs are set up.
17
Hyderabad venues covered
6
Named exhibition venues
11
Venue categories
Tier 1
Telangana market
Exhibiting at Open Exhibition Grounds, Hyderabad
Open grounds where hangar-style German-tent exhibitions and trade fairs are set up. We design, fabricate, install and dismantle stalls here, with the organiser drawings and approvals prepared as part of the project rather than quoted as an extra.
A venue imposes a rulebook, and the stall has to be built to it: how high you can go, whether you can hang anything, what you may fix into the floor, how much power you get and which hours you can work. We read that rulebook at design stage, not at build-up.
Placed against the rest of the Hyderabad list, Open Exhibition Grounds, Hyderabad is the most open end of it — no walls, no ceiling, no fixed limits, and no shelter either. Knowing that before you design is what stops a stand being drawn for a hall and then built in a ballroom, which is the most expensive revision in this business.
Hyderabad has the depth of a Tier 1 market — 6 named exhibition venues and 11 venue categories on our list. Depth helps with availability and hurts with scheduling, because every exhibitor in the hall is working to the same window through the same access point.
Building on an open exhibition ground
On an open ground the building is temporary and so is everything it depends on. Flooring levels the ground, tenting keeps the rain out, a generator provides the power and all three are installed before your stand begins. That is why open-ground build-up windows are longer than indoor ones, and why the sequence matters more than the stand design does.
Within Hyderabad the specific room still matters: two open exhibition grounds in the same city can differ on clear height, access and power. We confirm those in writing for your edition rather than carrying an assumption from the last build.
What changes at open exhibition grounds
| Build input | At open exhibition grounds |
|---|---|
| Access route & panel sizes | Vehicles usually reach the stand itself, so panel size is limited by the truck and the crew rather than by a door. That is the one real structural advantage an open ground gives a builder. |
| Fixing method | Pegs, ballast and ground anchors, plus fixings into the hangar or tent frame where the organiser permits them. Tall elements are triangulated because there is nothing solid to lean against. |
| Power source | Generator supply with its own distribution and a backup path. Cable runs are long, so voltage drop, protected routing and crossing points across walkways are designed rather than discovered. |
| Floor protection | Raised platform flooring to level uneven ground, keep dust down and give cables a route. Underneath the platform, drainage matters as much as levelling does. |
| Build & strike hours | A longer build-up window than an indoor hall, because tenting, flooring and power all precede the stand. Daylight working is the norm and dust is continuous. |
| Weather & environment | The governing constraint. Rain, wind, heat and dust are all designed for — sealed edges, covered junctions, wind loading on anything tall, and no graphic that cannot take a shower. |
Read this as the pattern for open exhibition grounds, then check it against the organiser's pack. Where the two disagree, the pack wins and the drawing changes before the material does.
How we build for this kind of venue
- Edge sealing and covered electrical junctions as standard on an exposed site
- Generator power with its own distribution and a backup path
- Panels sized by the truck and the crew rather than by a door
- Drainage considered under the platform as carefully as the levels above it
- Raised platform flooring to level the ground, seal out dust and carry cable runs
- Weather protection and water ingress planned for, not improvised on the day
What to ask the organiser about open exhibition grounds
A quote for open exhibition grounds is an estimate until these answers exist, and a price afterwards. Ask the organiser for them in writing — not because anyone is being difficult, but because the same venue issues different rules for different shows.
Get these in writing before you brief anyone
- Whether tenting or a hangar is provided by the organiser, and the clear height under it
- Whether power is generator or mains, the allocation per stand, and the distance to the connection point
- The build-up sequence, since flooring and tenting have to be finished before stands begin
- Who is responsible for drainage and for standing water during the show
- Overnight security arrangements on an open site
- Wind-loading limits on tall or hanging elements, and whether any are barred outright
Who exhibits at Hyderabad venues, and what that changes
The sector mix in Hyderabad is IT & software, pharma, biotech, defence and real estate, and each of those brings its own non-negotiables onto a stand. The table below is what we design against at open exhibition grounds before a single visual is drawn, because most of these requirements are structural or electrical rather than decorative.
Mixed-sector shows are the harder case. IT & software and pharma visitors want opposite things from the same footprint, and the resolution is zoning rather than compromise: open display on the aisle face, a closed or semi-closed corner behind it, and storage that keeps the difference invisible.
Hyderabad's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| IT & software | Software has nothing physical to show, so the stand sells with screens and conversation. Plan demo pods at standing height, a quiet zone or headphones, and a closed corner for a serious discussion. |
| Pharma | A pharma audience talks in private. A closed meeting corner, lockable sample storage, a wipe-clean dispensing counter and literature capacity matter more than open display area. |
| Biotech | Biotech conversations are technical and confidential. A bench-style demo area, a screen carrying data rather than imagery, and a closed meeting room are the working requirements. |
| Defence | Defence shows are access-controlled and document-heavy. Expect a closed briefing area, controlled sightlines into it, and display cases rather than open product. |
| Real estate | Real estate sells on models and screens. A scale model on a lit plinth, large visuals at eye height, and several seated pockets where a booking conversation can run twenty minutes. |
The sectors listed are the ones that drive exhibiting activity across Telangana. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Open Exhibition Grounds, Hyderabad
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Open Exhibition Grounds, Hyderabad
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
Lead time is the column exhibitors underestimate. Three weeks is the base for a custom build, four from 24 sq.m and five from 54 sq.m, and those are fabrication weeks after design sign-off rather than from the day you first call. At open exhibition grounds the build-up window itself is rarely the problem; the approval and fabrication time ahead of it usually is.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Open Exhibition Grounds, Hyderabad
On an open ground your competition is the sky, not the neighbouring stand. Height, a roof line of your own and lighting that still works at dusk are what make a stand findable from the far side of the ground.
Give people a reason to stop that is not a brochure. A live demonstration, a working product, a short screen loop or something they can physically handle converts far better than signage alone.
Exhibitors here come largely from IT & software, pharma and biotech, and an IT & software audience has specific expectations: product visible, specification available, and somewhere to talk without shouting. We design for that rather than applying a generic layout.
How a build at open exhibition grounds runs
01
Read the venue pack
Before anything is drawn we ask for the organiser's pack for your edition: the stand plan with open sides marked, the build-up and dismantle windows, and the rules on height, rigging, fixing and power. At open exhibition grounds the answer that most often changes a design is whether tenting and flooring are provided by the organiser, and when they will be finished.
02
Design to the limits
Design happens against the constraints rather than around them, so platform flooring, sealed edges, wind loading on tall elements and generator distribution is a starting condition here rather than a late revision. What you approve in 3D is therefore something that can actually be built in this room.
03
Build and test in the workshop
The stall is fabricated and then stood up in our own workshop: panels numbered, graphics trial-fitted, circuits tested and lamps aimed. Problems get found where there is time to fix them rather than at open exhibition grounds at midnight.
04
Install, hand over, strike
A named project manager and the crew that pre-assembled the stall install it to the drawing and hand over a working stand. Site care is part of that rather than an afterthought: levelling, dust sealing at the platform edges and covered electrical junctions. The same crew returns to dismantle and clear the stand inside the organiser's window.
What else is in Hyderabad
We cover 6 other named exhibition venues in Hyderabad: HITEX Exhibition Centre, Hyderabad International Convention Centre (HICC), Nampally Exhibition Grounds, Shilpakala Vedika, Jalavihar and Novotel & HICC Halls. By name they break down into 2 event venues, 1 purpose-built exhibition or trade centre, 1 convention centre, 1 open ground or maidan and 1 hotel ballroom or hotel convention hall, and the gap between the easiest and the hardest of those to build in is larger than any gap in stall size.
We also cover 11 venue categories in Hyderabad — university & college campuses, industry association halls, stadium & sports complexes, corporate campus event spaces, industrial estate expo grounds, government exhibition grounds, resort & lawn venues, 5-star hotel ballrooms, convention & banquet halls, open exhibition grounds and mall atriums — because most Indian shows outside the top handful of cities happen in a room that was built for something else. Each of those categories has its own access, fixing and power pattern, and each gets its own page.
Named Hyderabad venues, read by what each one calls itself
| Venue | Type read from the name | What that implies for a stand |
|---|---|---|
| HITEX Exhibition Centre | Purpose-built exhibition or trade centre | Hall shows are walked at pace along long aisles, so the stand has to answer what you do from twenty metres and why it matters from two. |
| Hyderabad International Convention Centre (HICC) | Convention centre | A pillar-less hall gives you a long sightline down the aisle, which makes the face that reads from thirty metres away worth more than the one a visitor sees standing in front of you. |
| Nampally Exhibition Grounds | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
| Shilpakala Vedika | Event venue | Settle the one visitor action the stand exists to produce, then judge every design decision against it. |
| Jalavihar | Event venue | Settle the one visitor action the stand exists to produce, then judge every design decision against it. |
| Novotel & HICC Halls | Hotel ballroom or hotel convention hall | Ballroom audiences are corporate and arrive in groups, so seated conversation space earns its square metres here in a way it would not at a consumer show. |
A venue's name is a strong hint and not a specification. We confirm height, rigging, fixing, power and hours from the organiser's pack for your edition before design sign-off.
Every Hyderabad venue we cover
Build-up
Build-up, access and approvals in Hyderabad
Every Hyderabad venue issues its own build-up schedule, power allocation and list of what you may and may not fix to the structure. We read it before fabrication, because a panel that will not fit through the access door is an expensive thing to discover at the venue.
Design, fabrication, graphics, lighting, flooring, furniture, installation and dismantle can all sit on one quote, which is usually cheaper than sourcing them separately once you account for three margins and the coordination time.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Hyderabad organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Exhibiting elsewhere in Telangana
Telangana is not a one-city exhibition market. We cover 3 cities in the state — Hyderabad, Warangal and Karimnagar — with the same workshops, crews and project managers, so a programme that runs across several of them runs on one schedule rather than several.
Because we cover open exhibition grounds in all 3 Telangana cities on our list, a stand designed for this venue type is designed for the state. The structure, the fixing method and the power assumptions carry over; only the footprint and the graphics change.
A multi-city programme is mostly a logistics question rather than a design one. One approved drawing set, one set of reusable panels, graphics printed per city and a crew that travels with the stand — that is the whole model, and it is what keeps the per-city cost falling as the programme goes on.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Venue FAQ
Can you build at Open Exhibition Grounds, Hyderabad?+
Yes. We build at open exhibition grounds throughout Hyderabad, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Open Exhibition Grounds, Hyderabad cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
Who is on site during build-up at Open Exhibition Grounds, Hyderabad?+
A named project manager and the crew that pre-assembled the stall. They install to the drawing, hand over a working stand and return to dismantle and clear it within the organiser's window.
What are the build-up timings at Open Exhibition Grounds, Hyderabad?+
Build-up windows are set by the organiser for each show rather than by the venue alone, so we confirm them in writing for your edition and plan the build — including night shifts if needed — around them.
How early should I book for a show at Open Exhibition Grounds, Hyderabad?+
Four to six weeks ahead for a custom stall and eight or more for a double-decker or pavilion. Urgent builds in seven to ten days are possible with a simplified design.
Can you provide AV, lighting and furniture at Open Exhibition Grounds, Hyderabad?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
Is build-up longer on an open ground?+
Yes. Tenting, flooring and power distribution all have to be finished before stand building starts, so the organiser's build-up period is longer than an indoor hall's and the sequence is published. We plan our arrival against that sequence rather than against the first available day.
How is power supplied on an open exhibition ground?+
Usually by generator, with distribution run out to the stands and a backup path for critical loads. We confirm the allocation and the distance to the connection point in advance, because long cable runs change both the cable specification and the cost.
Do you design differently for IT & software exhibitors here?+
Yes. Hyderabad's show calendar is driven by IT & software, pharma, biotech, defence and real estate, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at another Telangana venue?+
Usually, if it is built for it. We cover 3 Telangana cities including Hyderabad, Warangal and Karimnagar, and a frame-and-skin stand can be stored, re-skinned with new graphics and rebuilt at the equivalent venue elsewhere in the state. Say so at design stage, because a reusable stand is detailed differently.
What is the biggest risk at open exhibition grounds?+
Discovering a constraint after fabrication. Flooring, tenting and generator power all precede your stand on an open ground, so a crew planned in for the first available day arrives before the site is ready for them. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Hyderabad
Other Telangana cities we cover
Exhibiting soon? Let's build your stall.