Bengaluru venue
Stall fabrication at Sheraton Grand & Hotel Convention Halls
Sheraton Grand & Hotel Convention Halls is one of Bengaluru's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year.
18
Bengaluru venues covered
7
Named exhibition venues
11
Venue categories
Tier 1
Karnataka market
Exhibiting at Sheraton Grand & Hotel Convention Halls
Sheraton Grand & Hotel Convention Halls is one of Bengaluru's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year. We design, fabricate, install and dismantle stalls here, with the organiser drawings and approvals prepared as part of the project rather than quoted as an extra.
Two stands of identical size can need completely different engineering depending on the room they go into. Height limits, rigging availability, fixing restrictions, power allocation and build hours all change with the venue, and all of them are settled in writing before fabrication starts.
Placed against the rest of the Bengaluru list, Sheraton Grand & Hotel Convention Halls is the most constrained end of it — a finished room you are borrowing and must hand back untouched. Knowing that before you design is what stops a stand being drawn for a hall and then built in a ballroom, which is the most expensive revision in this business.
Bengaluru has the depth of a Tier 1 market — 7 named exhibition venues and 11 venue categories on our list. Depth helps with availability and hurts with scheduling, because every exhibitor in the hall is working to the same window through the same access point.
Building in a hotel ballroom
Ballrooms are the most constrained room type a stall builder works in, and the constraints are all about the building rather than the show. Clear height stops at the chandelier line, nothing may be fixed to the structure, panels have to pass a service lift, and the room is often needed for a banquet the night before and the night after. None of that is a problem if it is known at design stage; all of it is a problem if it is discovered on load-in.
Sheraton Grand & Hotel Convention Halls is read here as a hotel ballroom or hotel convention hall, which is how we plan a build until the organiser's pack for your edition says otherwise. The pack is what settles height, rigging, fixing, power and hours for a specific show, and the same building can issue different rules for two shows in the same month.
What changes at Sheraton Grand & Hotel Convention Halls
| Build input | At a venue of this kind |
|---|---|
| Access route & panel sizes | A service lift and banquet corridors rather than a loading bay. Panel width is set by the lift car and the tightest corner on the route, so sheets are broken down to pass the lift instead of to suit the room. |
| Fixing method | No drilling into floors, walls or ceilings. Structures are freestanding and ballasted, joined with clamps and tension fittings, and anything tall gets a weighted base rather than a bolt. |
| Power source | Hotel house supply, tapped at points agreed with the banqueting engineer. The total allocation is capped, so lighting goes to LED and heavy equipment is declared early. |
| Floor protection | Carpet, parquet and stone protected before the first trolley moves. Protection boards under wheels and route matting along the corridor are part of the build, not an extra line. |
| Build & strike hours | Overnight, or between the hotel's own bookings. The room often has to be usable again within hours, which makes dismantle as planned an operation as the build. |
| Weather & environment | Enclosed and air-conditioned, so weather is not a factor — but air-conditioning throw and chandelier heat do decide where screens, print and anything living can sit. |
Read this as the pattern for hotel ballroom or hotel convention hall, then check it against the organiser's pack. Where the two disagree, the pack wins and the drawing changes before the material does.
How we build for this kind of venue
- Load-in scheduled overnight or between the hotel's own bookings
- Pre-cut and pre-finished in the workshop so nothing is sawn inside the hotel
- Carpet and parquet protection laid before the first trolley enters the room
- House power tapped at points agreed with the banqueting engineer
- Freestanding structures weighted at the base rather than fixed to the building
- No-drill fixings only — ballast plates, clamps and tension joints
What to ask the organiser about Sheraton Grand & Hotel Convention Halls
A quote for hotel ballroom or hotel convention hall is an estimate until these answers exist, and a price afterwards. Ask the organiser for them in writing — not because anyone is being difficult, but because the same venue issues different rules for different shows.
Get these in writing before you brief anyone
- The load-in window, and whether the room is in use the evening before
- Which power points exhibitors may use, at what total load, and who makes the connection
- Whether anything at all may be suspended, and if not, how tall a freestanding element is permitted
- Service-lift car dimensions and the tightest turn on the route from the dock to the ballroom
- Clear height to the lowest obstruction — chandelier, beam, sprinkler or light fitting — rather than the ceiling height printed on the floor plan
- The hotel's floor-protection requirement and who is expected to supply it
Who exhibits at Bengaluru venues, and what that changes
The sector mix in Bengaluru is IT & software, aerospace, biotech, electronics and coffee & food, and each of those brings its own non-negotiables onto a stand. The table below is what we design against at hotel ballroom or hotel convention hall before a single visual is drawn, because most of these requirements are structural or electrical rather than decorative.
Mixed-sector shows are the harder case. Biotech and electronics visitors want opposite things from the same footprint, and the resolution is zoning rather than compromise: open display on the aisle face, a closed or semi-closed corner behind it, and storage that keeps the difference invisible.
Bengaluru's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| Biotech | Biotech conversations are technical and confidential. A bench-style demo area, a screen carrying data rather than imagery, and a closed meeting room are the working requirements. |
| Electronics | Electronics audiences expect working units, which makes clean power with surge protection, cable management that survives three show days, and glare-free screen angles the first decisions. |
| Coffee & food | Coffee and food need a serviced counter — water, drainage, equipment power, a bin out of sight — and a queue that forms inside your stand rather than across the aisle. |
| IT & software | Software has nothing physical to show, so the stand sells with screens and conversation. Plan demo pods at standing height, a quiet zone or headphones, and a closed corner for a serious discussion. |
| Aerospace | Aerospace buyers come for components and certification. Expect scale models and cutaways on plinths, a secure cabinet for restricted material, and a closed room for anything export-controlled. |
The sectors listed are the ones that drive exhibiting activity across Karnataka. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Sheraton Grand & Hotel Convention Halls
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Sheraton Grand & Hotel Convention Halls
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
The figures are the same ones our stall planner uses, so a quote can be checked against them line by line: storage at 10% of the area up to 18 sq.m and 15% above it, a meeting corner at 5% unless you are actually hosting meetings, display taking whatever remains, one staff member per 9 sq.m, and the number of visitors who can stand in the stall at once coming out at display area divided by 2.5.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Sheraton Grand & Hotel Convention Halls
In a ballroom the room is already handsome, so a stand that competes with the chandeliers loses. Work low, well lit and well finished, and spend the available height on one vertical brand element rather than on a wall.
Give people a reason to stop that is not a brochure. A live demonstration, a working product, a short screen loop or something they can physically handle converts far better than signage alone.
Exhibitors here come largely from IT & software, aerospace and biotech, and an IT & software audience has specific expectations: product visible, specification available, and somewhere to talk without shouting. We design for that rather than applying a generic layout.
How a build at Sheraton Grand & Hotel Convention Halls runs
01
Read the venue pack
Before anything is drawn we ask for the organiser's pack for your edition: the stand plan with open sides marked, the build-up and dismantle windows, and the rules on height, rigging, fixing and power. At hotel ballroom or hotel convention hall the answer that most often changes a design is the clear height to the lowest chandelier, beam or sprinkler, and the dimensions of the service lift.
02
Design to the limits
The concept is then developed inside those limits rather than adjusted to them afterwards. At hotel ballroom or hotel convention hall that means designing for freestanding ballasted structures, a height that clears the lowest fitting, and panels that pass the service lift from the first sketch instead of retrofitting it to a finished drawing.
03
Build and test in the workshop
Carpentry, metalwork, spray finishing, large-format print and electrical assembly all happen in-house, and the whole stall is assembled once before it ships. That is what turns a short on-site window into enough time.
04
Install, hand over, strike
On site the work is assembly rather than fabrication, which is the whole point of the previous stage. At hotel ballroom or hotel convention hall the install also covers carpet and parquet protection laid before the first trolley enters the room, and the same crew comes back to strike the stand and clear the space.
What else is in Bengaluru
The named venue list for Bengaluru runs to 6 buildings on top of this one: Bangalore International Exhibition Centre (BIEC), KTPO Trade Centre, Whitefield, Palace Grounds, Bangalore International Centre, Tripura Vasini, Palace Grounds and Jayamahal Palace Grounds. Taking each name at its word, they divide into 3 purpose-built exhibition and trade centres and 3 open grounds and maidans — which is why a stand that worked at one Bengaluru venue is not automatically a stand that works at the next.
We also cover 11 venue categories in Bengaluru — university & college campuses, industry association halls, stadium & sports complexes, corporate campus event spaces, industrial estate expo grounds, government exhibition grounds, resort & lawn venues, 5-star hotel ballrooms, convention & banquet halls, open exhibition grounds and mall atriums — because most Indian shows outside the top handful of cities happen in a room that was built for something else. Each of those categories has its own access, fixing and power pattern, and each gets its own page.
Named Bengaluru venues, read by what each one calls itself
| Venue | Type read from the name | What that implies for a stand |
|---|---|---|
| Bangalore International Exhibition Centre (BIEC) | Purpose-built exhibition or trade centre | Hall shows are walked at pace along long aisles, so the stand has to answer what you do from twenty metres and why it matters from two. |
| KTPO Trade Centre, Whitefield | Purpose-built exhibition or trade centre | In a purpose-built hall you are one of many stands with identical freedoms, so differentiation comes from the things the hall allows and most exhibitors never use: height, light and a clear reason to step in off the aisle.. |
| Palace Grounds | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
| Bangalore International Centre | Purpose-built exhibition or trade centre | Hall shows are walked at pace along long aisles, so the stand has to answer what you do from twenty metres and why it matters from two. |
| Tripura Vasini, Palace Grounds | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
| Jayamahal Palace Grounds | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
A venue's name is a strong hint and not a specification. We confirm height, rigging, fixing, power and hours from the organiser's pack for your edition before design sign-off.
Every Bengaluru venue we cover
Build-up
Build-up, access and approvals in Bengaluru
The two things that cost exhibitors time in Bengaluru are materials arriving loose and electricals being tested for the first time on site. We ship pre-assembled, pre-wired and pre-fitted, which is why a tight build-up window is normally enough.
Everything the stand needs — structure, print, lighting, flooring, furniture, AV and the crew to install and strike it — can be bundled into a single itemised quote with one project manager behind it.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Bengaluru organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Exhibiting elsewhere in Karnataka
Bengaluru is one of 6 Karnataka cities on our list, alongside Mysuru, Mangaluru, Hubballi, Belagavi and Davanagere. For an exhibitor doing a state circuit that matters practically: the structure travels, the graphics are reprinted, and nobody has to re-engineer a stand for each stop.
A stand engineered for this venue is rarely a one-show asset. Frame-and-skin construction lets the structure be stored and re-skinned for the next city, which is why the second show in a programme costs materially less than the first.
A multi-city programme is mostly a logistics question rather than a design one. One approved drawing set, one set of reusable panels, graphics printed per city and a crew that travels with the stand — that is the whole model, and it is what keeps the per-city cost falling as the programme goes on.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Sheraton Grand & Hotel Convention Halls FAQ
Can you build at Sheraton Grand & Hotel Convention Halls?+
Yes. Sheraton Grand & Hotel Convention Halls is one of the Bengaluru venues our crews work at regularly, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Sheraton Grand & Hotel Convention Halls cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
What are the build-up timings at Sheraton Grand & Hotel Convention Halls?+
Build-up windows are set by the organiser for each show rather than by the venue alone, so we confirm them in writing for your edition and plan the build — including night shifts if needed — around them.
How early should I book for a show at Sheraton Grand & Hotel Convention Halls?+
Four to six weeks ahead for a custom stall and eight or more for a double-decker or pavilion. Urgent builds in seven to ten days are possible with a simplified design.
Can you provide AV, lighting and furniture at Sheraton Grand & Hotel Convention Halls?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
Who is on site during build-up at Sheraton Grand & Hotel Convention Halls?+
A named project manager and the crew that pre-assembled the stall. They install to the drawing, hand over a working stand and return to dismantle and clear it within the organiser's window.
How is height limited in a hotel ballroom?+
By the lowest obstruction rather than the ceiling — a chandelier, a beam, a sprinkler head or a light fitting. We ask for that figure in writing before the design is finalised, because it is usually well below the ceiling height on the floor plan.
Can you build without drilling into a hotel ballroom?+
Yes, and we assume it as the default. Ballroom stands are freestanding, ballasted at the base and joined with clamps and tension fittings, so nothing is fixed to the floor, walls or ceiling and the room is handed back as it was found.
Do you design differently for IT & software exhibitors here?+
Yes. Bengaluru's show calendar is driven by IT & software, aerospace, biotech, electronics and coffee & food, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at another Karnataka venue?+
Usually, if it is built for it. We cover 6 Karnataka cities including Bengaluru, Mysuru, Mangaluru and Hubballi, and a frame-and-skin stand can be stored, re-skinned with new graphics and rebuilt at the equivalent venue elsewhere in the state. Say so at design stage, because a reusable stand is detailed differently.
What is the biggest risk at hotel ballroom or hotel convention hall?+
Discovering a constraint after fabrication. A ballroom's usable height is set by the lowest chandelier or sprinkler rather than by the ceiling, and a stand drawn to the ceiling height on the floor plan has to be cut down on site. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Bengaluru
Other Karnataka cities we cover
Exhibiting soon? Let's build your stall.