Bengaluru venue
Stall fabrication at Bangalore International Exhibition Centre (BIEC)
Bangalore International Exhibition Centre (BIEC) is one of Bengaluru's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year.
18
Bengaluru venues covered
7
Named exhibition venues
11
Venue categories
Tier 1
Karnataka market
Exhibiting at Bangalore International Exhibition Centre (BIEC)
Bangalore International Exhibition Centre (BIEC) is one of Bengaluru's key exhibition venues, hosting trade fairs, consumer expos and corporate events throughout the year. Our crews work to the organiser's build-up window at this venue, pre-assembling in the workshop so site time goes on assembly rather than fabrication.
A venue imposes a rulebook, and the stall has to be built to it: how high you can go, whether you can hang anything, what you may fix into the floor, how much power you get and which hours you can work. We read that rulebook at design stage, not at build-up.
Bangalore International Exhibition Centre (BIEC) sits in Bengaluru's venue mix at the purpose-built end of it — the fewest constraints and therefore the most competition for attention. That position, more than the stall size, is what decides how the stand is engineered: the 18 venues we cover in the city span purpose-built halls, borrowed interiors and open ground, and those are three different trades rather than three versions of one.
As a Tier 1 exhibition city, Bengaluru carries 7 named venues as well as 11 venue categories, which is why two shows in the same week can need entirely different builds. The practical consequence of that density is congestion at build-up: shared bays, lift queues and a hard clearance deadline that nobody moves.
Building in a purpose-built exhibition hall
A purpose-built exhibition or trade centre is the one venue type designed for what you are about to do. There is a loading bay at dock height, a hall door sized for exhibition freight, a floor slab built to take load, a published build-up and dismantle schedule and a metered power allocation you order at booking. This is the only kind of venue where the stand, rather than the door, decides the panel size.
We treat Bangalore International Exhibition Centre (BIEC) as a purpose-built exhibition or trade centre for planning purposes and then confirm every figure against the organiser's exhibitor pack for your edition, because rules are issued per show rather than per building.
What changes at Bangalore International Exhibition Centre (BIEC)
| Build input | At a venue of this kind |
|---|---|
| Access route & panel sizes | A dedicated loading bay, dock-height access and a hall door sized for exhibition freight. This is the one venue type where the stand, not the door, sets the panel size. |
| Fixing method | Freestanding on the hall floor, with rigging from roof points where the organiser offers it. Fixing into the floor slab is normally barred even here, so weight still goes into the base. |
| Power source | A metered allocation ordered through the organiser, usually with single and three-phase options. Order the load you need at booking, because upgrading on site is slow and expensive. |
| Floor protection | A slab built for the job, so protection is about your own finish rather than the building's. Raised platform flooring becomes a design choice here instead of a necessity. |
| Build & strike hours | A published build-up and dismantle schedule, often across several days, with a hard deadline for aisle clearance. Night working is common and normally permitted. |
| Weather & environment | Enclosed, but the hall doors stand open through build-up, so expect dust and heat while building and a controlled environment once the show opens. |
These six are the ones that change the stand rather than the drawing. Confirm them for your edition with the organiser and we will design to the answers; where an answer is unavailable we design to the conservative assumption and revise once it arrives.
How we build for this kind of venue
- Published build-up and dismantle schedules, with night working normally permitted
- Dust and heat during build-up while the hall doors stand open
- Height allowances confirmed against the organiser's rulebook before sign-off
- A hard deadline for aisle clearance that the whole programme is planned around
- Rigging from roof points where the organiser offers it, ordered in advance
- A floor slab built for load, so platform flooring is a design choice not a necessity
What to ask the organiser about Bangalore International Exhibition Centre (BIEC)
Send the organiser this list before you commission anything. Each answer removes a contingency from the quote, and at purpose-built exhibition or trade centre two or three of them change the structure rather than the finish.
Get these in writing before you brief anyone
- The power allocation you have ordered, the phase, and where the connection sits
- The maximum build height for your stand type, and the setback rules at the edges
- Whether the organiser's drawing approval has a submission deadline
- Floor-loading limits, if anything heavy or two-storey is planned
- The published build-up and dismantle schedule, including the aisle clearance deadline
- Whether rigging from roof points is available, at what cost and by what deadline
Who exhibits at Bengaluru venues, and what that changes
The sector mix in Bengaluru is IT & software, aerospace, biotech, electronics and coffee & food, and each of those brings its own non-negotiables onto a stand. The table below is what we design against at purpose-built exhibition or trade centre before a single visual is drawn, because most of these requirements are structural or electrical rather than decorative.
Most Bengaluru exhibitors are selling to more than one of those audiences, which is an argument for a layout rather than a style. Give the electronics audience the frontage and the coffee & food audience the back corner, and the stand stops trying to be two things in the same square metre.
Bengaluru's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| Electronics | Electronics audiences expect working units, which makes clean power with surge protection, cable management that survives three show days, and glare-free screen angles the first decisions. |
| Coffee & food | Coffee and food need a serviced counter — water, drainage, equipment power, a bin out of sight — and a queue that forms inside your stand rather than across the aisle. |
| IT & software | Software has nothing physical to show, so the stand sells with screens and conversation. Plan demo pods at standing height, a quiet zone or headphones, and a closed corner for a serious discussion. |
| Aerospace | Aerospace buyers come for components and certification. Expect scale models and cutaways on plinths, a secure cabinet for restricted material, and a closed room for anything export-controlled. |
| Biotech | Biotech conversations are technical and confidential. A bench-style demo area, a screen carrying data rather than imagery, and a closed meeting room are the working requirements. |
The sectors listed are the ones that drive exhibiting activity across Karnataka. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Bangalore International Exhibition Centre (BIEC)
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Bangalore International Exhibition Centre (BIEC)
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
Read the display column rather than the size column. A 36 sq.m stand carries about 28.8 sq.m of usable display once storage and a meeting corner are taken out, which is the number that decides how much product and how many people the stand can actually hold.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Bangalore International Exhibition Centre (BIEC)
In a purpose-built hall you are one of many stands with identical freedoms, so differentiation comes from the things the hall allows and most exhibitors never use: height, light and a clear reason to step in off the aisle.
Height and light are what buy visibility in a shared hall. Where the venue allows it, go up — a tall brand element or a hanging banner is read from across the floor in a way that floor-level graphics never are.
Because Bengaluru's show calendar leans towards IT & software, aerospace and biotech, the stands we build at this venue usually need to balance open display against a private corner for commercial conversations.
How a build at Bangalore International Exhibition Centre (BIEC) runs
01
Read the venue pack
Before anything is drawn we ask for the organiser's pack for your edition: the stand plan with open sides marked, the build-up and dismantle windows, and the rules on height, rigging, fixing and power. At purpose-built exhibition or trade centre the answer that most often changes a design is the build height allowance, the rigging deadline and the power load ordered at booking.
02
Design to the limits
Design happens against the constraints rather than around them, so a height and rigging strategy ordered to the organiser's deadline, and a metered power load is a starting condition here rather than a late revision. What you approve in 3D is therefore something that can actually be built in this room.
03
Build and test in the workshop
The stall is fabricated and then stood up in our own workshop: panels numbered, graphics trial-fitted, circuits tested and lamps aimed. Problems get found where there is time to fix them rather than at purpose-built exhibition or trade centre at midnight.
04
Install, hand over, strike
On site the work is assembly rather than fabrication, which is the whole point of the previous stage. At purpose-built exhibition or trade centre the install also covers aisle clearance by the organiser's published deadline, and the same crew comes back to strike the stand and clear the space.
What else is in Bengaluru
The named venue list for Bengaluru runs to 6 buildings on top of this one: KTPO Trade Centre, Whitefield, Palace Grounds, Bangalore International Centre, Tripura Vasini, Palace Grounds, Sheraton Grand & Hotel Convention Halls and Jayamahal Palace Grounds. Taking each name at its word, they divide into 3 open grounds and maidans, 2 purpose-built exhibition and trade centres and 1 hotel ballroom or hotel convention hall — which is why a stand that worked at one Bengaluru venue is not automatically a stand that works at the next.
We also cover 11 venue categories in Bengaluru — 5-star hotel ballrooms, convention & banquet halls, open exhibition grounds, mall atriums, university & college campuses, industry association halls, stadium & sports complexes, corporate campus event spaces, industrial estate expo grounds, government exhibition grounds and resort & lawn venues — because most Indian shows outside the top handful of cities happen in a room that was built for something else. Each of those categories has its own access, fixing and power pattern, and each gets its own page.
Named Bengaluru venues, read by what each one calls itself
| Venue | Type read from the name | What that implies for a stand |
|---|---|---|
| KTPO Trade Centre, Whitefield | Purpose-built exhibition or trade centre | In a purpose-built hall you are one of many stands with identical freedoms, so differentiation comes from the things the hall allows and most exhibitors never use: height, light and a clear reason to step in off the aisle.. |
| Palace Grounds | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
| Bangalore International Centre | Purpose-built exhibition or trade centre | Hall shows are walked at pace along long aisles, so the stand has to answer what you do from twenty metres and why it matters from two. |
| Tripura Vasini, Palace Grounds | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
| Sheraton Grand & Hotel Convention Halls | Hotel ballroom or hotel convention hall | Ballroom audiences are corporate and arrive in groups, so seated conversation space earns its square metres here in a way it would not at a consumer show. |
| Jayamahal Palace Grounds | Open ground or maidan | On an open ground your competition is the sky, not the neighbouring stand. |
A venue's name is a strong hint and not a specification. We confirm height, rigging, fixing, power and hours from the organiser's pack for your edition before design sign-off.
Every Bengaluru venue we cover
Build-up
Build-up, access and approvals in Bengaluru
Access, lift queues and a shared loading bay decide how long a build takes in Bengaluru far more than stall size does. Our crews work to the organiser's window, including night shifts where the schedule requires it, and clear the stand inside the dismantle period so no penalty lands on your deposit.
Design, fabrication, graphics, lighting, flooring, furniture, installation and dismantle can all sit on one quote, which is usually cheaper than sourcing them separately once you account for three margins and the coordination time.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Bengaluru organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Exhibiting elsewhere in Karnataka
Beyond Bengaluru we build in 5 other Karnataka cities: Mysuru, Mangaluru, Hubballi, Belagavi and Davanagere. Same drawings, same workshop, same project manager — which is what makes a second city cheaper than the first rather than a repeat of it.
A stand engineered for this venue is rarely a one-show asset. Frame-and-skin construction lets the structure be stored and re-skinned for the next city, which is why the second show in a programme costs materially less than the first.
Running several cities in a season works best with one structure and several graphic sets. The panels are numbered and stored between shows, each city gets its own print and its own organiser paperwork, and the same project manager carries the job from the first show to the last.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Bangalore International Exhibition Centre (BIEC) FAQ
Can you build at Bangalore International Exhibition Centre (BIEC)?+
Yes. Bangalore International Exhibition Centre (BIEC) is one of the Bengaluru venues our crews work at regularly, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Bangalore International Exhibition Centre (BIEC) cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
What are the build-up timings at Bangalore International Exhibition Centre (BIEC)?+
Build-up windows are set by the organiser for each show rather than by the venue alone, so we confirm them in writing for your edition and plan the build — including night shifts if needed — around them.
Do you handle approvals for Bangalore International Exhibition Centre (BIEC)?+
Yes. We prepare dimensioned drawings, electrical load details and structural documents to the organiser's format, and check the design against the venue's height, rigging and fire rules before fabrication.
Can you provide AV, lighting and furniture at Bangalore International Exhibition Centre (BIEC)?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
How early should I book for a show at Bangalore International Exhibition Centre (BIEC)?+
Four to six weeks ahead for a custom stall and eight or more for a double-decker or pavilion. Urgent builds in seven to ten days are possible with a simplified design.
Is rigging available in a purpose-built exhibition hall?+
Often, from roof points, but it is ordered through the organiser and usually has a submission deadline well before build-up. We confirm availability and cost before the design relies on anything suspended, and design a freestanding alternative where it is not offered.
How is power ordered for an exhibition hall stand?+
As a metered allocation through the organiser at booking, with single or three-phase options. The load is declared rather than estimated, because adding capacity during build-up is slow and costs considerably more than ordering it correctly.
Do you design differently for IT & software exhibitors here?+
Yes. Bengaluru's show calendar is driven by IT & software, aerospace, biotech, electronics and coffee & food, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at another Karnataka venue?+
Usually, if it is built for it. We cover 6 Karnataka cities including Bengaluru, Mysuru, Mangaluru and Hubballi, and a frame-and-skin stand can be stored, re-skinned with new graphics and rebuilt at the equivalent venue elsewhere in the state. Say so at design stage, because a reusable stand is detailed differently.
What is the biggest risk at purpose-built exhibition or trade centre?+
Discovering a constraint after fabrication. Rigging and power are ordered through the organiser against a deadline, so a design that depends on a hanging banner ordered late becomes a freestanding design at short notice. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Bengaluru
Other Karnataka cities we cover
Exhibiting soon? Let's build your stall.