Bengaluru, Karnataka
Exhibition Lighting in Bengaluru
From first sketch to final dismantle, our Bengaluru team delivers exhibition lighting for trade fairs, consumer expos, conferences and corporate events across the city — with the drawings, approvals and on-site crew included rather than quoted later.
Why choose us
Bengaluru's trusted exhibition lighting partner
Track lights, spots, LED strips and backlit graphics that make your stall the brightest in the aisle. We regularly build at Bangalore International Exhibition Centre (BIEC), KTPO Trade Centre, Whitefield and Palace Grounds and other Bengaluru venues.
Most exhibitors in Bengaluru come from IT & software, aerospace, biotech, electronics and coffee & food, and each of those audiences reads a stand differently. A IT & software buyer wants specification and a demo within reach; a consumer audience wants a reason to stop. We design for whichever one is walking your aisle.
What changes between cities is rarely the design and almost always the logistics. In Bengaluru that means the access route, the lift queue, the organiser's build-up window and the venue's rules on height, rigging and fixing. We confirm those before fabrication starts, which is why exhibition lighting here is quoted as a delivered stand rather than as a set of parts.
- Fire-retardant, organiser-approved materials
- Free photoreal 3D design with every confirmed build
- In-house design and fabrication — no sub-contracted surprises
- Organiser drawings and approvals handled for you
- Storage and reuse options for repeat exhibitors
What's included
Exhibition Lighting — scope
Price guide: Included in custom builds.
How we deliver exhibition lighting in Bengaluru
Track lights, spots, LED strips and backlit graphics that make your stall the brightest in the aisle. What you receive is screens, lighting, audio and content running on cue, operated and then cleared. We test as a system, not as a parts list, and we carry redundancy on the single points of failure.
01
Technical recce and plan
First the constraints — power, rigging, sightlines, noise limits, curfew — then the design. Over-specified kit is the most common line of waste on an AV quote.
02
Equipment and content preparation
Screens, lights, audio, media servers and content are prepared and bench-tested together before they leave for the venue, so the first time it all runs is not in front of your audience.
03
Install and programming
Rigging, cabling, focusing and programming happen inside the build-up window, followed by a full technical rehearsal with your presenter or demo lead.
04
Show operation and strike
A technician stays with the setup through show hours, and the whole rig is struck and cleared inside the organiser's dismantle window.
What an exhibition lighting quote in Bengaluru is built from
Included in custom builds. Beyond that headline, the variables that actually move an exhibition lighting quote are screen or projection surface area and resolution, number of fixtures, projectors or drones, show length and number of repeats per day and rigging, trussing and power distribution. A quote itemised against those lines is the only way to tell a cheap stall from an incomplete one.
Cost drivers
- screen or projection surface area and resolution
- number of fixtures, projectors or drones
- show length and number of repeats per day
- rigging, trussing and power distribution
- content production and programming time
- number of operators and show days
- transport and standby equipment
Space plan by stall size in Bengaluru
| Stall size | Footprint | Display | Storage | Meeting | Staff | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | 7.6 sq.m | 0.9 sq.m | 0.5 sq.m | 2 | 3 |
| 18 sq.m | 3 × 6 m | 15.3 sq.m | 1.8 sq.m | 0.9 sq.m | 2 | 3 |
| 36 sq.m | 6 × 6 m | 28.8 sq.m | 5.4 sq.m | 1.8 sq.m | 4 | 4 |
| 54 sq.m | 6 × 9 m | 43.2 sq.m | 8.1 sq.m | 2.7 sq.m | 6 | 5 |
| 72 sq.m | 6 × 12 m | 57.6 sq.m | 10.8 sq.m | 3.6 sq.m | 8 | 5 |
| 100 sq.m | 10 × 10 m | 80 sq.m | 15 sq.m | 5 sq.m | 12 | 5 |
Calculated with the same formula as our stall planner: storage is 10% of area up to 18 sq.m and 15% above it, meeting space 5% unless you are hosting meetings, and the remainder is display. Staff = area ÷ 9.
Materials and finishes
What we build in
- indoor and outdoor LED panels
- laser projectors and media servers
- moving heads, profiles and LED wash fixtures
- line-array and point-source audio
- truss, motors and ground support
- wireless microphones and comms
Venue types we build for in Bengaluru
Bengaluru is one of India's primary exhibition cities, and the venue mix here decides how a stall has to be built. We cover 18 venues in and around the city — 7 named exhibition venues including Bangalore International Exhibition Centre (BIEC), KTPO Trade Centre, Whitefield and Palace Grounds, plus 11 venue categories such as hotel ballrooms, convention halls, open grounds and mall atriums. A purpose-built exhibition hall gives you ceiling height, floor loading and a loading bay; a hotel ballroom restricts height and rigging and usually bars drilling; an open ground means weather protection and generator power have to be designed in from the start.
Build-up, logistics and approvals in Bengaluru
In Bengaluru the schedule is the organiser's, not yours — which means the build has to be designed around a fixed window, a shared bay and a queue. Pre-assembly in the workshop is what turns that window from a risk into a routine.
Show dates in Bengaluru move year to year, so confirm the current edition with the organiser before you plan around it. What does not move is the lead time: four to six weeks for a custom stall, eight or more for a double-decker or a pavilion, and seven to ten days when a show has crept up on you.
Judge a Bengaluru quote on what it includes rather than what it totals. Transport, installation, dismantle, electrical fittings and taxes are the lines most often left out, and they are not small.
A stall partner in Bengaluru should be able to show you dimensioned drawings before fabrication and hand you a working stand at handover. If either is missing, the risk moves onto your show day.
What we need to quote exhibition lighting in Bengaluru
A quote for exhibition lighting in Bengaluru needs very little from you to start. Send these and we come back with a concept and an itemised figure — usually inside 24 hours for a straightforward brief.
- venue, hall or stand plan with power and rigging details
- show dates and running times
- content, video or presentation files
- audience size and seating arrangement
- any organiser limits on sound level, rigging or curfew
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Exhibition Lighting in Bengaluru: FAQ
How much does exhibition lighting cost in Bengaluru?+
Included in custom builds. The exact figure depends on stall size, the number of open sides, finishes, AV and the venue's build-up rules. Share your stall size and show and we send an itemised quote within 24 hours.
How early should I book exhibition lighting in Bengaluru?+
Four to six weeks before the show for a custom stall, and eight weeks or more for a double-decker or pavilion project. For shows that are already close we can often deliver in seven to ten days with a simplified design.
Which industries do you work with in Bengaluru?+
Exhibitors across IT & software, aerospace, biotech, electronics and coffee & food and many more. The sector changes what the stand has to do, so we brief against your buyers rather than applying one template.
Do you handle organiser approvals at Bangalore International Exhibition Centre (BIEC)?+
Yes. We prepare and submit stall drawings, electrical load details and structural documents as the organiser requires, and we check the design against height, rigging and fire rules before it reaches you.
Is 3D design included with exhibition lighting in Bengaluru?+
Yes. A photoreal 3D design is free with every confirmed fabrication order, revised until you approve it. Design-only projects are quoted separately.
What do you need from me to quote exhibition lighting in Bengaluru?+
Venue, hall or stand plan with power and rigging details, show dates and running times and content, video or presentation files. With that we can return a concept and an itemised quote — usually inside 24 hours for a straightforward brief.
Do you work with agencies on exhibition lighting in Bengaluru?+
Yes. We deliver white-label scopes for event and creative agencies, and work directly with pavilion organisers coordinating several co-exhibitors under one structure.
More services in Bengaluru
Exhibition Lighting in nearby cities
Guides for this build
Exhibiting soon? Let's build your stall.