Delhi venue
Stall fabrication at Convention & Banquet Halls, Delhi
Large pillar-less banquet and convention halls used for consumer expos, wedding fairs and B2B meets.
19
Delhi venues covered
8
Named exhibition venues
11
Venue categories
Tier 1
Delhi market
Exhibiting at Convention & Banquet Halls, Delhi
Large pillar-less banquet and convention halls used for consumer expos, wedding fairs and B2B meets. Everything from the first 3D concept to clearing the stand after dismantle is handled by one team and one project manager.
A venue imposes a rulebook, and the stall has to be built to it: how high you can go, whether you can hang anything, what you may fix into the floor, how much power you get and which hours you can work. We read that rulebook at design stage, not at build-up.
Convention & Banquet Halls, Delhi sits in Delhi's venue mix at the practical middle of it — clear span and usable height, bought at the price of a single shared door. That position, more than the stall size, is what decides how the stand is engineered: the 19 venues we cover in the city span purpose-built halls, borrowed interiors and open ground, and those are three different trades rather than three versions of one.
Delhi is one of India's primary exhibition cities, and the mix shows it: 8 named exhibition venues alongside the 11 venue categories we cover here. That depth means the calendar is dense, crews and services are available locally, and the build-up window is competed for by every other exhibitor in the hall — so a comfortable lead time matters more here than in a quieter market.
Building in a convention or banquet hall
A convention or banquet hall is the middle ground between a ballroom and an exhibition hall: more height and more freedom than the first, less access and less power than the second. The practical limits are the door, the house distribution board and the hall's next booking, and all three are knowable before fabrication starts.
Convention & banquet halls vary from one address to the next even inside Delhi, so the figures below are the pattern rather than the contract. The organiser's pack for your show is what we actually design to.
What changes at convention & banquet halls
| Build input | At convention & banquet halls |
|---|---|
| Access route & panel sizes | Often a single pair of doors and a shared corridor rather than a loading bay. The narrowest door on the route sets the widest panel, so large surfaces are split into carried sections joined on site. |
| Fixing method | Freestanding construction on a finished floor. Walls and columns stay untouched, and where height is needed it is braced back into the stand itself rather than into the hall. |
| Power source | House distribution boards, with a load figure confirmed in advance. When several stands share one board, the stand that declared its load honestly is the one that stays lit. |
| Floor protection | Protection wherever trolleys run and under anything heavy or wheeled. Raised platform flooring also gives cables a route when the floor cannot be chased or taped. |
| Build & strike hours | A booked, sequenced slot, because every exhibitor comes through the same door. Dismantle is timed against the hall's next booking, which is often tighter than the show's own schedule. |
| Weather & environment | Indoors, so the variables are air-conditioning and the door line. A stand beside an entrance takes heat, dust and a draught every time the doors open. |
Every row here is a design input rather than a detail. Two stands of identical area in Delhi can need completely different engineering because these six answers differ, which is why we settle them before anything is cut.
How we build for this kind of venue
- Power drawn from house distribution with the stand's load confirmed in advance
- Freestanding construction braced back into the stand rather than into the hall
- Raised platform flooring where cable runs cannot be chased into the floor
- Concealed joints so a split panel reads as one surface on the finished stand
- Panel sizes set by the widest door on the route, not by the width of the hall
- Floor protection wherever trolleys run and under any wheeled or heavy element
What to ask the organiser about convention & banquet halls
Send the organiser this list before you commission anything. Each answer removes a contingency from the quote, and at convention & banquet halls two or three of them change the structure rather than the finish.
Get these in writing before you brief anyone
- Whether the hall has another booking immediately after the show, and the hard clearance time
- The power allocation per stand and which distribution board it comes from
- The load-in slot allocated to your stand, and the order exhibitors are called in
- The dimensions of the widest door on the route in, and whether a dock or ramp exists at all
- Whether the organiser supplies aisle carpet, and where your stand's edge is deemed to begin
- Clear ceiling height and whether suspension from the hall structure is offered
Who exhibits at Delhi venues, and what that changes
IT & electronics, automobile, pharma, handicrafts and education account for most of the exhibiting activity in Delhi, and the sector is a bigger design input than the brand is. A automobile visitor and a pharma visitor will judge the same 18 sq.m by completely different criteria, so we brief against the sector first and the identity second.
Where a Delhi show draws from several of those sectors at once, the stand has to serve two briefs in one footprint. Zoning does it — automobile on the open frontage where it needs to be seen, pharma in the pocket behind where it needs to be discussed — and the space plan below is where that gets decided.
Delhi's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| Automobile | An automobile and components audience wants to touch the part. Plan a load-rated display platform, a cutaway or turntable at hip height, and circulation wide enough for a crowd around one vehicle. |
| Pharma | A pharma audience talks in private. A closed meeting corner, lockable sample storage, a wipe-clean dispensing counter and literature capacity matter more than open display area. |
| Handicrafts | Handicraft stands sell density. Open shelving, sightlines into the stand rather than a counter across the front, and light aimed at the object instead of the ceiling. |
| Education | Education fairs run on queues and counselling. Standing-height counters, a seated corner for parents, brochure capacity, and a layout that absorbs a session-break rush without blocking the aisle. |
| IT & electronics | An IT and electronics audience expects working kit, which makes clean power, cable management and glare-free screen positions the first design decisions rather than the last. |
The sectors listed are the ones that drive exhibiting activity across Delhi. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Convention & Banquet Halls, Delhi
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Convention & Banquet Halls, Delhi
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
The figures are the same ones our stall planner uses, so a quote can be checked against them line by line: storage at 10% of the area up to 18 sq.m and 15% above it, a meeting corner at 5% unless you are actually hosting meetings, display taking whatever remains, one staff member per 9 sq.m, and the number of visitors who can stand in the stall at once coming out at display area divided by 2.5.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Convention & Banquet Halls, Delhi
Banquet halls put stands close together, so the differentiator is usually light rather than size. A stand that is brighter than its neighbours reads as better finished even when it is not bigger.
Give people a reason to stop that is not a brochure. A live demonstration, a working product, a short screen loop or something they can physically handle converts far better than signage alone.
The buyers at this venue tend to come from IT & electronics, automobile and pharma. That shapes the brief more than the aesthetics do — an IT & electronics visitor is looking for evidence, not atmosphere.
How a build at convention & banquet halls runs
01
Read the venue pack
The job starts with paperwork rather than with a concept. We want the stand plan, the access route, the power allocation and the permitted working hours in writing, and at convention & banquet halls we pay particular attention to the width of the narrowest door on the route and the load-in slot you have been allocated.
02
Design to the limits
Design happens against the constraints rather than around them, so split panels with concealed joints and a load declared honestly on the house distribution board is a starting condition here rather than a late revision. What you approve in 3D is therefore something that can actually be built in this room.
03
Build and test in the workshop
Carpentry, metalwork, spray finishing, large-format print and electrical assembly all happen in-house, and the whole stall is assembled once before it ships. That is what turns a short on-site window into enough time.
04
Install, hand over, strike
On site the work is assembly rather than fabrication, which is the whole point of the previous stage. At convention & banquet halls the install also covers protection on the trolley route and a strike timed against the hall's next booking, and the same crew comes back to strike the stand and clear the space.
What else is in Delhi
We cover 8 other named exhibition venues in Delhi: Bharat Mandapam (Pragati Maidan), Yashobhoomi – India International Convention & Expo Centre, NSIC Exhibition Complex, Okhla, Talkatora Indoor Stadium, Siri Fort Auditorium and JLN Stadium Complex, plus 2 more on the city page. By name they break down into 3 purpose-built exhibition and trade centres, 2 indoor stadiums and arenas, 1 auditorium, hall or cultural centre, 1 hotel ballroom or hotel convention hall and 1 open ground or maidan, and the gap between the easiest and the hardest of those to build in is larger than any gap in stall size.
We also cover 11 venue categories in Delhi — convention & banquet halls, open exhibition grounds, mall atriums, university & college campuses, industry association halls, stadium & sports complexes, corporate campus event spaces, industrial estate expo grounds, government exhibition grounds, resort & lawn venues and 5-star hotel ballrooms — because most Indian shows outside the top handful of cities happen in a room that was built for something else. Each of those categories has its own access, fixing and power pattern, and each gets its own page.
Named Delhi venues, read by what each one calls itself
| Venue | Type read from the name | What that implies for a stand |
|---|---|---|
| Bharat Mandapam (Pragati Maidan) | Purpose-built exhibition or trade centre | In a purpose-built hall you are one of many stands with identical freedoms, so differentiation comes from the things the hall allows and most exhibitors never use: height, light and a clear reason to step in off the aisle.. |
| Yashobhoomi – India International Convention & Expo Centre | Purpose-built exhibition or trade centre | Hall shows are walked at pace along long aisles, so the stand has to answer what you do from twenty metres and why it matters from two. |
| NSIC Exhibition Complex, Okhla | Purpose-built exhibition or trade centre | In a purpose-built hall you are one of many stands with identical freedoms, so differentiation comes from the things the hall allows and most exhibitors never use: height, light and a clear reason to step in off the aisle.. |
| Talkatora Indoor Stadium | Indoor stadium or arena | Stadium shows move a lot of visitors across a wide floor in both directions, so plan flow rather than frontage. |
| Siri Fort Auditorium | Auditorium, hall or cultural centre | Most of the real traffic at an auditorium venue is in the foyer and during the breaks, so put the stand where people queue and plan for everything to happen in twenty-minute bursts.. |
| JLN Stadium Complex | Indoor stadium or arena | Stadium shows move a lot of visitors across a wide floor in both directions, so plan flow rather than frontage. |
| Aerocity Hotel Convention Halls | Hotel ballroom or hotel convention hall | In a ballroom the room is already handsome, so a stand that competes with the chandeliers loses. |
| Dilli Haat INA | Open ground or maidan | Open-ground visitors arrive hot, dusty and already tired of walking. |
A venue's name is a strong hint and not a specification. We confirm height, rigging, fixing, power and hours from the organiser's pack for your edition before design sign-off.
Every Delhi venue we cover
Build-up
Build-up, access and approvals in Delhi
The two things that cost exhibitors time in Delhi are materials arriving loose and electricals being tested for the first time on site. We ship pre-assembled, pre-wired and pre-fitted, which is why a tight build-up window is normally enough.
Everything the stand needs — structure, print, lighting, flooring, furniture, AV and the crew to install and strike it — can be bundled into a single itemised quote with one project manager behind it.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Delhi organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Taking the same stand to another city
We cover Delhi as the Delhi entry on our list, so multi-city programmes from here normally run to Mumbai, Bengaluru, Chennai and Hyderabad or similar. One drawing set and one reusable structure is the pattern, with print as the only per-city cost of consequence.
A stand engineered for this venue is rarely a one-show asset. Frame-and-skin construction lets the structure be stored and re-skinned for the next city, which is why the second show in a programme costs materially less than the first.
A multi-city programme is mostly a logistics question rather than a design one. One approved drawing set, one set of reusable panels, graphics printed per city and a crew that travels with the stand — that is the whole model, and it is what keeps the per-city cost falling as the programme goes on.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Venue FAQ
Can you build at Convention & Banquet Halls, Delhi?+
Yes. We build at convention & banquet halls throughout Delhi, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Convention & Banquet Halls, Delhi cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
Do you handle approvals for Convention & Banquet Halls, Delhi?+
Yes. We prepare dimensioned drawings, electrical load details and structural documents to the organiser's format, and check the design against the venue's height, rigging and fire rules before fabrication.
Can you provide AV, lighting and furniture at Convention & Banquet Halls, Delhi?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
How early should I book for a show at Convention & Banquet Halls, Delhi?+
Four to six weeks ahead for a custom stall and eight or more for a double-decker or pavilion. Urgent builds in seven to ten days are possible with a simplified design.
What are the build-up timings at Convention & Banquet Halls, Delhi?+
Build-up windows are set by the organiser for each show rather than by the venue alone, so we confirm them in writing for your edition and plan the build — including night shifts if needed — around them.
What decides the dismantle deadline in a banquet hall?+
The hall's next booking, more often than the show. We confirm the hard clearance time in writing and plan the strike backwards from it, including a night shift where the gap between events requires one.
Is power included in a convention hall stand?+
The connection point and the allocation come from the organiser or the venue; the stand's internal distribution, fittings and testing are ours. We confirm the allocated load in writing before specifying lighting and AV, because an upgrade on site is slow and expensive.
Do you design differently for IT & electronics exhibitors here?+
Yes. Delhi's show calendar is driven by IT & electronics, automobile, pharma, handicrafts and education, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at a show in another city?+
Usually, if it is built for it. A frame-and-skin stand can be stored between shows, re-skinned with new graphics and rebuilt in another city, with print as the only significant per-city cost. It needs to be designed that way from the start rather than adapted later.
What is the biggest risk at convention & banquet halls?+
Discovering a constraint after fabrication. A panel that will not pass the narrowest door on the route ends up being cut in a corridor, which is the most common avoidable failure in a banquet hall. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Delhi
Exhibiting soon? Let's build your stall.