Delhi venue
Stall fabrication at Government Exhibition Grounds, Delhi
Government-run haats and exhibition grounds used for handicraft, MSME and state fairs.
19
Delhi venues covered
8
Named exhibition venues
11
Venue categories
Tier 1
Delhi market
Exhibiting at Government Exhibition Grounds, Delhi
Government-run haats and exhibition grounds used for handicraft, MSME and state fairs. Our crews work to the organiser's build-up window at this venue, pre-assembling in the workshop so site time goes on assembly rather than fabrication.
Two stands of identical size can need completely different engineering depending on the room they go into. Height limits, rigging availability, fixing restrictions, power allocation and build hours all change with the venue, and all of them are settled in writing before fabrication starts.
Placed against the rest of the Delhi list, Government Exhibition Grounds, Delhi is the public end of it — the broadest audience, the longest run and the most documentary approvals. Knowing that before you design is what stops a stand being drawn for a hall and then built in a ballroom, which is the most expensive revision in this business.
As a Tier 1 exhibition city, Delhi carries 8 named venues as well as 11 venue categories, which is why two shows in the same week can need entirely different builds. The practical consequence of that density is congestion at build-up: shared bays, lift queues and a hard clearance deadline that nobody moves.
Building on a government exhibition ground
A state or civic fair ground is a public venue with public rules. Permanent structures, trees and paving stay untouched, the electrical allocation is modest, the paperwork is submitted well ahead of the build, and the fair itself usually runs for a week or more — which makes durability a bigger design issue than appearance.
Within Delhi the specific room still matters: two government exhibition grounds in the same city can differ on clear height, access and power. We confirm those in writing for your edition rather than carrying an assumption from the last build.
What changes at government exhibition grounds
| Build input | At government exhibition grounds |
|---|---|
| Access route & panel sizes | Gated grounds with a controlled vehicle list, then a carry to the stall. Passes are issued per crew member, so the crew list has to be final earlier than at a commercial show. |
| Fixing method | Pegs and ballast on open ground, freestanding on paved areas. Permanent structures, trees and paving are left untouched, which rules out leaning anything on them. |
| Power source | Ground distribution or generator, with an allocation set by the department running the fair. It is usually modest, so LED lighting and low-load fittings are the default rather than a choice. |
| Floor protection | Platform flooring over uneven ground with dust sealing at the edges, and protection boards over paved or heritage surfaces. |
| Build & strike hours | Set by the organising department and strict at both ends. Approvals are documentary, so the paperwork is prepared and lodged well before the build begins. |
| Weather & environment | Open or semi-covered, so rain and dust are planned for. These fairs often run a week or more, which makes durability a bigger issue than finish. |
These six are the ones that change the stand rather than the drawing. Confirm them for your edition with the organiser and we will design to the answers; where an answer is unavailable we design to the conservative assumption and revise once it arrives.
How we build for this kind of venue
- Platform flooring over uneven ground with dust sealing at the edges
- Signage sized to read across a wide public thoroughfare
- Protection boards over paved and heritage surfaces
- Gated grounds with a controlled vehicle list and passes issued per crew member
- Permanent structures, trees and paving left untouched
- A modest power allocation set by the organising department — LED lighting as default
What to ask the organiser about government exhibition grounds
Send the organiser this list before you commission anything. Each answer removes a contingency from the quote, and at government exhibition grounds two or three of them change the structure rather than the finish.
Get these in writing before you brief anyone
- Build and strike hours, and the penalty for overrunning either
- The power allocation per stall and whether supply is mains or generator
- Ground surface at your stand, and whether pegging into it is permitted
- The vehicle list and crew pass process, and the deadline for submitting names
- Which department issues approvals, in what format, and by what date
- Overnight security on the ground and whether stock may be left on the stand
Who exhibits at Delhi venues, and what that changes
IT & electronics, automobile, pharma, handicrafts and education account for most of the exhibiting activity in Delhi, and the sector is a bigger design input than the brand is. A pharma visitor and a handicrafts visitor will judge the same 18 sq.m by completely different criteria, so we brief against the sector first and the identity second.
Most Delhi exhibitors are selling to more than one of those audiences, which is an argument for a layout rather than a style. Give the pharma audience the frontage and the handicrafts audience the back corner, and the stand stops trying to be two things in the same square metre.
Delhi's sector mix and what each needs from a stand
| Sector | What the stand has to do |
|---|---|
| Pharma | A pharma audience talks in private. A closed meeting corner, lockable sample storage, a wipe-clean dispensing counter and literature capacity matter more than open display area. |
| Handicrafts | Handicraft stands sell density. Open shelving, sightlines into the stand rather than a counter across the front, and light aimed at the object instead of the ceiling. |
| Education | Education fairs run on queues and counselling. Standing-height counters, a seated corner for parents, brochure capacity, and a layout that absorbs a session-break rush without blocking the aisle. |
| IT & electronics | An IT and electronics audience expects working kit, which makes clean power, cable management and glare-free screen positions the first design decisions rather than the last. |
| Automobile | An automobile and components audience wants to touch the part. Plan a load-rated display platform, a cutaway or turntable at hip height, and circulation wide enough for a crowd around one vehicle. |
The sectors listed are the ones that drive exhibiting activity across Delhi. Where your show draws from more than one of them, the space plan below is where the compromise gets resolved.
Services
What we build at Government Exhibition Grounds, Delhi
Exhibition Stall Design
Concept-to-3D stall design that stops visitors in the aisle.
Stall Fabrication
In-house carpentry, metal and print for flawless builds.
Custom Exhibition Booths
One-of-a-kind booths built around your brand.
Modular Exhibition Stalls
Reusable, quick-install stalls for frequent exhibitors.
Octanorm & System Stalls
Clean aluminium shell-scheme and system booths.
Double-Decker Stalls
Two-storey stands that double your space.
Pavilion Design
State, industry and association pavilions.
Country Pavilions
National pavilions at Indian and global expos.
Trade Show Booths
High-impact booths for B2B trade shows.
Exhibition Stand Builders
End-to-end stand building with on-site crews.
Event Stage Fabrication
Stages, backdrops and sets for events.
AV & LED Wall Support
LED walls, sound, screens and AV crews.
Stall sizes and lead times for Government Exhibition Grounds, Delhi
Most stands at a venue like this fall between 9 and 72 sq.m. The table below uses the same formula as our stall planner — storage at 10% of area up to 18 sq.m and 15% above, a meeting corner at 5% unless you are hosting meetings, display taking the remainder — so you can sanity-check a quote against the space you have actually booked.
Read the display column rather than the size column. A 36 sq.m stand carries about 28.8 sq.m of usable display once storage and a meeting corner are taken out, which is the number that decides how much product and how many people the stand can actually hold.
Space, staffing and lead time by stall size
| Stall size | Footprint | Likely layout | Display | Staff | Visitors at once | Build weeks |
|---|---|---|---|---|---|---|
| 9 sq.m | 3 × 3 m | Inline or corner | 7.6 sq.m | 2 | 3 | 3 |
| 18 sq.m | 3 × 6 m | Inline or corner | 15.3 sq.m | 2 | 6 | 3 |
| 36 sq.m | 6 × 6 m | Corner or three-side open | 28.8 sq.m | 4 | 11 | 4 |
| 54 sq.m | 6 × 9 m | Corner or three-side open | 43.2 sq.m | 6 | 17 | 5 |
| 72 sq.m | 6 × 12 m | Three-side open or island | 57.6 sq.m | 8 | 23 | 5 |
Custom stalls typically run ₹9,000–₹18,000 per sq.m for the build; modular and octanorm construction costs less, and an upgraded shell scheme less again. AV, furniture, flooring, transport and taxes are quoted on separate lines.
Designing a stand that works at Government Exhibition Grounds, Delhi
A public fair that runs for a week draws a general audience, so durability and clarity beat finesse. Specify surfaces that survive constant handling and signage that works from across a wide thoroughfare.
Height and light are what buy visibility in a shared hall. Where the venue allows it, go up — a tall brand element or a hanging banner is read from across the floor in a way that floor-level graphics never are.
The buyers at this venue tend to come from IT & electronics, automobile and pharma. That shapes the brief more than the aesthetics do — an IT & electronics visitor is looking for evidence, not atmosphere.
How a build at government exhibition grounds runs
01
Read the venue pack
Before anything is drawn we ask for the organiser's pack for your edition: the stand plan with open sides marked, the build-up and dismantle windows, and the rules on height, rigging, fixing and power. At government exhibition grounds the answer that most often changes a design is the department's approval format and the deadline for crew and vehicle lists.
02
Design to the limits
The concept is then developed inside those limits rather than adjusted to them afterwards. At government exhibition grounds that means designing for durable surfaces for a long run and an LED lighting load that fits a modest allocation from the first sketch instead of retrofitting it to a finished drawing.
03
Build and test in the workshop
The stall is fabricated and then stood up in our own workshop: panels numbered, graphics trial-fitted, circuits tested and lamps aimed. Problems get found where there is time to fix them rather than at government exhibition grounds at midnight.
04
Install, hand over, strike
A named project manager and the crew that pre-assembled the stall install it to the drawing and hand over a working stand. Site care is part of that rather than an afterthought: platform flooring over uneven ground and protection boards on paved surfaces. The same crew returns to dismantle and clear the stand inside the organiser's window.
What else is in Delhi
The named venue list for Delhi runs to 8 buildings on top of this one: Bharat Mandapam (Pragati Maidan), Yashobhoomi – India International Convention & Expo Centre, NSIC Exhibition Complex, Okhla, Talkatora Indoor Stadium, Siri Fort Auditorium and JLN Stadium Complex, plus 2 others. Taking each name at its word, they divide into 3 purpose-built exhibition and trade centres, 2 indoor stadiums and arenas, 1 auditorium, hall or cultural centre, 1 hotel ballroom or hotel convention hall and 1 open ground or maidan — which is why a stand that worked at one Delhi venue is not automatically a stand that works at the next.
We also cover 11 venue categories in Delhi — stadium & sports complexes, corporate campus event spaces, industrial estate expo grounds, government exhibition grounds, resort & lawn venues, 5-star hotel ballrooms, convention & banquet halls, open exhibition grounds, mall atriums, university & college campuses and industry association halls — because most Indian shows outside the top handful of cities happen in a room that was built for something else. Each of those categories has its own access, fixing and power pattern, and each gets its own page.
Named Delhi venues, read by what each one calls itself
| Venue | Type read from the name | What that implies for a stand |
|---|---|---|
| Bharat Mandapam (Pragati Maidan) | Purpose-built exhibition or trade centre | In a purpose-built hall you are one of many stands with identical freedoms, so differentiation comes from the things the hall allows and most exhibitors never use: height, light and a clear reason to step in off the aisle.. |
| Yashobhoomi – India International Convention & Expo Centre | Purpose-built exhibition or trade centre | Hall shows are walked at pace along long aisles, so the stand has to answer what you do from twenty metres and why it matters from two. |
| NSIC Exhibition Complex, Okhla | Purpose-built exhibition or trade centre | In a purpose-built hall you are one of many stands with identical freedoms, so differentiation comes from the things the hall allows and most exhibitors never use: height, light and a clear reason to step in off the aisle.. |
| Talkatora Indoor Stadium | Indoor stadium or arena | Stadium shows move a lot of visitors across a wide floor in both directions, so plan flow rather than frontage. |
| Siri Fort Auditorium | Auditorium, hall or cultural centre | Most of the real traffic at an auditorium venue is in the foyer and during the breaks, so put the stand where people queue and plan for everything to happen in twenty-minute bursts.. |
| JLN Stadium Complex | Indoor stadium or arena | Stadium shows move a lot of visitors across a wide floor in both directions, so plan flow rather than frontage. |
| Aerocity Hotel Convention Halls | Hotel ballroom or hotel convention hall | In a ballroom the room is already handsome, so a stand that competes with the chandeliers loses. |
| Dilli Haat INA | Open ground or maidan | Open-ground visitors arrive hot, dusty and already tired of walking. |
A venue's name is a strong hint and not a specification. We confirm height, rigging, fixing, power and hours from the organiser's pack for your edition before design sign-off.
Every Delhi venue we cover
Build-up
Build-up, access and approvals in Delhi
Every Delhi venue issues its own build-up schedule, power allocation and list of what you may and may not fix to the structure. We read it before fabrication, because a panel that will not fit through the access door is an expensive thing to discover at the venue.
You can take the whole scope or just part of it. Most exhibitors take design and build together and add AV and furniture to the same quote, because the alternative is reconciling three delivery schedules yourself.
What we handle for you
- Organiser drawings, electrical load details and approvals in the format Delhi organisers ask for
- Design checked against height, rigging, fixing and fire rules before sign-off
- Pre-assembly and electrical testing in the workshop before dispatch
- Transport, installation and an on-site crew inside the build-up window
- Dismantle and clearing the stand inside the dismantle period
Taking the same stand to another city
We cover Delhi as the Delhi entry on our list, so multi-city programmes from here normally run to Mumbai, Bengaluru, Chennai and Hyderabad or similar. One drawing set and one reusable structure is the pattern, with print as the only per-city cost of consequence.
A stand engineered for this venue is rarely a one-show asset. Frame-and-skin construction lets the structure be stored and re-skinned for the next city, which is why the second show in a programme costs materially less than the first.
Running several cities in a season works best with one structure and several graphic sets. The panels are numbered and stored between shows, each city gets its own print and its own organiser paperwork, and the same project manager carries the job from the first show to the last.
01
Brief
Share stall size, expo and goals. We call within 2 hours.
02
3D Design
Photoreal concepts in 48 hours, revised until perfect.
03
Fabrication
Built and pre-assembled in our own workshops.
04
Install & Show
On-site crew builds, hands over and dismantles.
FAQ
Venue FAQ
Can you build at Government Exhibition Grounds, Delhi?+
Yes. We build at government exhibition grounds throughout Delhi, covering design, fabrication, installation and dismantle inside the organiser's window.
What does a stall at Government Exhibition Grounds, Delhi cost?+
Custom stalls typically range from ₹9,000 to ₹18,000 per sq.m depending on size, finishes and AV; modular and octanorm builds cost less. Share your stand size and show dates for an itemised quote.
Can you work to a shell scheme at Government Exhibition Grounds, Delhi?+
Yes. Where the organiser supplies shell scheme panels we upgrade them with printed fabric or vinyl, raised flooring, spotlights and a branded counter, which lifts the stand a long way at modest cost.
Can you provide AV, lighting and furniture at Government Exhibition Grounds, Delhi?+
Yes — LED walls, screens, lighting, furniture, flooring and carpeting can be bundled with the stall build on a single quote.
What are the build-up timings at Government Exhibition Grounds, Delhi?+
Build-up windows are set by the organiser for each show rather than by the venue alone, so we confirm them in writing for your edition and plan the build — including night shifts if needed — around them.
Do you handle approvals for Government Exhibition Grounds, Delhi?+
Yes. We prepare dimensioned drawings, electrical load details and structural documents to the organiser's format, and check the design against the venue's height, rigging and fire rules before fabrication.
Is power limited at a state fair ground?+
Usually, yes. The allocation per stall is set by the organising department and tends to be modest, so lighting goes to LED, loads are declared honestly and anything heavy is agreed in advance rather than plugged in on the day.
How does a long fair run change the build?+
It moves the specification from finish to durability. A fair running a week or more means surfaces that take constant handling, graphics that do not scuff at hand height, stock storage sized for the whole run, and a stall that still looks maintained on the last day.
Do you design differently for IT & electronics exhibitors here?+
Yes. Delhi's show calendar is driven by IT & electronics, automobile, pharma, handicrafts and education, and the sector decides the fundamentals — how much product has to be on open display, how private the meeting space needs to be, whether the floor has to carry load and whether water, drainage or three-phase power are required. We brief against the sector before the identity.
Can the same stand be used at a show in another city?+
Usually, if it is built for it. A frame-and-skin stand can be stored between shows, re-skinned with new graphics and rebuilt in another city, with print as the only significant per-city cost. It needs to be designed that way from the start rather than adapted later.
What is the biggest risk at government exhibition grounds?+
Discovering a constraint after fabrication. Approvals here are documentary and carry deadlines, and a stall whose paperwork is late does not get a pass onto the ground. That is why we ask for the access route, the fixing rules, the power allocation and the build-up window in writing before anything is cut, rather than treating any of them as a site problem.
More in Delhi
Exhibiting soon? Let's build your stall.